Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

lifting ARB bar

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 655
Joined: Fri Nov 22, 2002 8:00 am
Location: Cranbourne, Victoria

lifting ARB bar

Post by bundyrum4x4 »

I have an ARB winch bar that I want to lift to suit by 50mm body lift.

Option 1
Cut the mounts off the bar and reweld and brace

Option 2
Cut the chassis, brace and lift 50mm removing the body lift blocks from the front.

What would be the best option?
89 Maverick LWB ute, Turbo Deisel, 6hp High Mount, 36" Peeds, lockers etc

GU 4.5, 35's etc
Top
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

option 2 if ur going to be keeping the car with the body lift ..
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

Option one because it's probably not legal to cut your chassis up, and because if you're going to cut one of two items, cut the cheaper one - the bullbar, not the car.

Just my thoughts. Both have advantages but I almost always prefer to do the work on the thing that attaches to the car, and leave the car as is.

Jason
This is not legal advice.
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Ive lifted a few, Do not touch chassis. Bar lifts easily.
Slice (grind(cut)) BBar chassis rails off level with back of bar. Add plate to cover cut off face dropping down 50mm extra. Butt chassis mounts up to plate, weld in place. Put gusset under between bar and mount and /or along inside rail mount to bar.
Do not lift full body lift amount take 5mm or so off as body flexes more and may hit bar wings.

Bazzle :P
Last edited by bazzle on Tue Jun 01, 2004 8:09 pm, edited 1 time in total.
Top
Posts: 1361
Joined: Thu Oct 24, 2002 8:47 pm
Location: Now in a happy place.

Post by Cheezy4x4 »

Come and have a chat with me for either way, (thats an hour or two blown) ;) Have done both ways lots. :D
NOW ABLE TOO SAY WHAT I WANT WITHOUT FEAR OF LOOSING SALES.
The person who says it cannot be done should not interrupt the person doing it.
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

Cheezy4x4 wrote:Come and have a chat with me for either way, (thats an hour or two blown) ;) Have done both ways lots. :D


Yeah like anyone's gonna go down for a "chat" after that comment!
This is not legal advice.
Top
Posts: 655
Joined: Fri Nov 22, 2002 8:00 am
Location: Cranbourne, Victoria

Post by bundyrum4x4 »

Thanks guys. Sounds like the bar is not to difficult to lift so will prob take that path.

Cheesy, will come over for a "quick" chat anyway.

Let you know how it goes next week as I hope to get it done before the Narby night run on Saturday ( I know how steep the entries to the bog holes are ).
89 Maverick LWB ute, Turbo Deisel, 6hp High Mount, 36" Peeds, lockers etc

GU 4.5, 35's etc
Top
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Post by hottiemonster »

bundyrum4x4 wrote:( I know how steep the entries to the bog holes are ).


i dont like the sound of that, hopefully i will be allright cheezy ;) :armsup:
Gq ute new built
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

Just remember a quick chat with him is about 2hrs minium :!: :D
THOUGHT FOR THE DAY....
Top
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!

Post by moose »

turps wrote:Just remember a quick chat with him is about 3 cans minium :!: :D


bundyrum4x4 , I,d go the chassis lift , can be engineered !!
improves approach angle heaps !!!

& if you ever damage your bar , you dont have to screw around modifing another bar , just bolt a NEWY on !!!! :D
MissForbyNoob wrote:
and one day i'll just become a worthless housewife.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests