Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Crown Wheel & Pinion compatibilty with lockers

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 824
Joined: Mon Jun 16, 2003 5:10 pm
Location: Vic

Crown Wheel & Pinion compatibilty with lockers

Post by bundytunna »

just a quick question about the compatibility of lockers with CW&P Gear
if i put twin lockers in my diffs now with 4.11 ratios can i later upgrade to say a 4.6 ratio and keep the lockers i have or do i need to buy a different locker
i reckon i wouldnt need to buy different lockers but i am not to sure
any one got an idea???
BUY MY HILUX PARTS
http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=29889
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

you can use the same lockers


NICK
TECH SCREW GURU
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Normally will be OK BUT also depends on what diff your talking about as you havnt said? as their are a few exceptions. :?:

Bazzle
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

bazzle wrote:Normally will be OK BUT also depends on what diff your talking about as you havnt said? as their are a few exceptions. :?:

Bazzle




like toyota to nissan :D



NICK
TECH SCREW GURU
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

NICK wrote:
bazzle wrote:Normally will be OK BUT also depends on what diff your talking about as you havnt said? as their are a few exceptions. :?:

Bazzle




like toyota to nissan :D



NICK


More like Dana. They have specific centres for specific gears.
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

RUFF wrote:
NICK wrote:
bazzle wrote:Normally will be OK BUT also depends on what diff your talking about as you havnt said? as their are a few exceptions. :?:

Bazzle




like toyota to nissan :D



NICK


More like Dana. They have specific centres for specific gears.



true, in that case would also apply to 80s or newer landcruiser, mq patrols, the G series patrols. So if you were to think about it only about half could be inter-changed between models.


NICK
TECH SCREW GURU
Top
Posts: 47
Joined: Sun May 02, 2004 11:47 pm
Location: Dubbo, NSW, Oz

Crown Wheel & Pinion compatibilty with lockers

Post by smiley »

when you upgrade to the 4.6 diffs let me know i will be interested in the 4.11's

Cheers

Smiley
Top
Posts: 824
Joined: Mon Jun 16, 2003 5:10 pm
Location: Vic

Post by bundytunna »

ther r 60 series diffs
i was preety sure i wouldnt have to change lockers but wanted to make sure
got the chance to buy a cheap locker so wanna put that in the front
what gear ratio would be suitable if i am runnin 35's on a 2f 60 series cruiser later looking to go to 37's
4.6????
BUY MY HILUX PARTS
http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=29889
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

what ever you run will be after market, unless you go to stout diffs but of memory they are 6.1 or 6.7


NICK
TECH SCREW GURU
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests