Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

mini spool?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 1087
Joined: Thu May 06, 2004 9:37 am
Location: Darwin N.T.

mini spool?

Post by SiKiD_01 »

is this any good for a vitara diff? has anyone used one?

is it better than welding?

how much?

thanks
1995 Vitara:
stock standard


WWW.DARWIN4X4.NET
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

Basically it's the same as weding up your diff but you can remove it....

However the price is basically about the same as another diff centre for you to weld up anyway :D
Top
Posts: 3443
Joined: Tue Oct 29, 2002 10:50 pm
Location: Currently On the Road !!

Post by Dozoor »

You will be hard pressed to find a mini spool for a vit ,
There is a company that does them for sierra rear , the splines are the same but the hemisphere on a vit rear is larger than a sierra, so they will not fit.
and although the front hemisphere from a sierra will fit within a vit front housing the splines for the front axles are smaller then the rear so there is non available for the front either ,

Larry.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest