Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

45 rear diff

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 964
Joined: Mon Jun 02, 2003 6:58 pm
Location: brisbane

45 rear diff

Post by bj56 »

trying to get it out to weld it but i cant get the axles out seems to be silicon used as a seal i have undone all the bots and cant get it off what r your tricks ????
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

I use a slide hammer like this attached to the axle flange on the two M8 threaded holes.

Image

Some people use a chisel between the axle flange and the wheel hub. If the sharp tip is aimed carefully at the gasket, damage to the surfaces can be avoided.

Dave
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

hrrrm dont use a chisel

there are normally two threaded holes in the end of the axle flange, put in some 10mm metric bolts (high tensile preferably) and wind it out!

wind each side a little, tap with a hammer on sides gently as it comes, and also spray 5-5-6 or wd40 as it comes, need to break gasket, should only be the resistance of the gasket , splines should come easy with no resistance at all, if its a lsd maybe take hand brake off.
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

there are also cone washers in the end of the axle flange, if you havent got these out theres no way that axle is coming out!

search under these forums for cone washer and youl find plenty of guideance on how to get em out, although they are still a pain in the arse
Top
Posts: 964
Joined: Mon Jun 02, 2003 6:58 pm
Location: brisbane

Post by bj56 »

ok i havent got the cone washers out yet will try that
Top
Posts: 662
Joined: Thu Jan 23, 2003 8:02 pm
Location: Picton

Post by Tazz »

Pmd you not long ago after having another think about it overnight, now see that you have the answers any way. they should come out now.
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

smack the fuck out the end of it with a hammer, this will shock load it and it will let go.


NICK
TECH SCREW GURU
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

another way to get it out would be with an oxy >_<
Top
Posts: 964
Joined: Mon Jun 02, 2003 6:58 pm
Location: brisbane

Post by bj56 »

thanks for your help guys iam sure i will be able to get it out now
Top
Posts: 947
Joined: Fri May 16, 2003 10:10 pm
Location: hervey bay

diff

Post by humphey »

hi lill bj what year is your cruiser ? is it the front or rear u r doin ?
Top
Posts: 964
Joined: Mon Jun 02, 2003 6:58 pm
Location: brisbane

Post by bj56 »

rear 79 mod
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest