what are peoples first hand experiences with steering damper compared to the return to centre style ?
how much harder is the turning force needed to turn , as i run a standard steering box on a welded front diff with 31's at about 8-10psi ?
what i want it for is to stop the steering wheel spinning out of control when i hit certain obstacles (at slow speed ) and to reduce bump steer on the road
any particular down falls etc oh its on a spoa with standard springs narrow track
cheers Jai
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
steering damper or return to center
steering damper or return to center
if its worth doing do it intensly , better still do it with MADPASSION
set your limits way beyond your abilities
set your limits way beyond your abilities
i run a rtc stabalizer
it will still kick the steering wheel out of my hands occaionlly
thats with 33's locked front at round 6 psi
and it is a biatch to turn with the lockers on
it will still kick the steering wheel out of my hands occaionlly
thats with 33's locked front at round 6 psi
and it is a biatch to turn with the lockers on
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Re: steering damper or return to center
stressed wrote:what are peoples first hand experiences with steering damper compared to the return to centre style ?
how much harder is the turning force needed to turn , as i run a standard steering box on a welded front diff with 31's at about 8-10psi ?
what i want it for is to stop the steering wheel spinning out of control when i hit certain obstacles (at slow speed ) and to reduce bump steer on the road
any particular down falls etc oh its on a spoa with standard springs narrow track
cheers Jai
The only real way your going to reduce that effect is powa steering ..
I have run both kinds and found the RTC one better, but neither were super effective at keeping the steering wheel being jerked around a bit offroad.. Bascially the bigger the rubber the worse it will happen.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Who is online
Users browsing this forum: No registered users and 1 guest