Has anyone had their chassis galvanised? What should I expect to pay for this for a RR chassis. I have been told $200 but that seems a bit too cheap to me.
If anyone could recommend someone in Brisbane/Sunshine coast that would be good.
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Chassis galvanizing
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Galvanising costs anythingfrom $350-450 per tonne.
35-45 cents per KG.
This is worked out on the final weight after Galvanising.
aprox the weight of the item pluss 7.5%.
other costs depend on the size of the bath EI: if they have to double dip ect.
RR chassy should fit in most baths.
Michael.
35-45 cents per KG.
This is worked out on the final weight after Galvanising.
aprox the weight of the item pluss 7.5%.
other costs depend on the size of the bath EI: if they have to double dip ect.
RR chassy should fit in most baths.
Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Re: Chassis galvanizing
auto_eng wrote:Has anyone had their chassis galvanised? What should I expect to pay for this for a RR chassis. I have been told $200 but that seems a bit too cheap to me.
If anyone could recommend someone in Brisbane/Sunshine coast that would be good.
Cheers
you might want to check with qld transport if you want to road register this, i know for instance that they defected a car with a chromed diff housing, said it was weaker due to the chromeing???
Galvanizing is a well accepted anti corrosion method used on all sorts of structural steel. The process doesn't effect the structural properties of the parent steel.
To quote the Galvanizers Association of NSW handbook " the galvanizing process has no effect on the tensile, bend or impact properties of any of the structural steels investigated... changes in mechanical properties attributable to the galvanizing process were detected only when the steel had been cold worked prior to galvanizing, but then only certain properties were affected..."
I have lost of litereature on the subject if anyone needs more details.
To quote the Galvanizers Association of NSW handbook " the galvanizing process has no effect on the tensile, bend or impact properties of any of the structural steels investigated... changes in mechanical properties attributable to the galvanizing process were detected only when the steel had been cold worked prior to galvanizing, but then only certain properties were affected..."
I have lost of litereature on the subject if anyone needs more details.
Had a FJ40 chassis blasted, acid dipped & galvanized bout 5-6 years ago in Townsville. From memory (which is rusty as hell) it cost bout $400-500.
made the mistake of not filling the threaded holes with grease so I had to re-tap all the holes 
made the mistake of not filling the threaded holes with grease so I had to re-tap all the holes Luv the sound of a diesel,
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.
The bigger the boy, the bigger the TOY!!
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.
The bigger the boy, the bigger the TOY!!
(only joshin 
)
which place did you ring.
Im sure i can do better for you.
was talking to the rep just now.
when are you thinking about doing it
Michael.
Im sure i can do better for you.
was talking to the rep just now.
when are you thinking about doing it
Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Sixty wrote:Had a FJ40 chassis blasted, acid dipped & galvanized bout 5-6 years ago in Townsville. From memory (which is rusty as hell) it cost bout $400-500.
How would filling the holes with grease help ??I would have thought the heat just melt the grease and you would still need to tap the holes.
OH .. I know sweet FA about Hot dip galvinising other than you coat one metal with another.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
love_mud wrote:Sixty wrote:Had a FJ40 chassis blasted, acid dipped & galvanized bout 5-6 years ago in Townsville. From memory (which is rusty as hell) it cost bout $400-500.
How would filling the holes with grease help ??I would have thought the heat just melt the grease and you would still need to tap the holes.
OH .. I know sweet FA about Hot dip galvinising other than you coat one metal with another.
thats what i was thinking aswell
I would be looking at doing it in the next 4 to 6 weeks. The vehicle comes off the road on Friday so it just depends how long it takes to strip it and get the sandblasting done first. I could wait a bit longer though if needed because other things need to be done to the vehicle also.
The place I rang was Sunstate Coatings at Narangbah. That was the closest one I could see to me and I could drop it off on a trip to Brisbane.
The place I rang was Sunstate Coatings at Narangbah. That was the closest one I could see to me and I could drop it off on a trip to Brisbane.
Who is online
Users browsing this forum: No registered users and 17 guests