Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

coily zook suspension

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

coily zook suspension

Post by RB zook »

anyone know of a deacent lift kit for a coily zoook, all i can find is 2 inch lift coils. i'm keen on building up my zook. how much lift would i need to fit 33 inch tyres. im gunna get get a bolt in 3 inch lift kit from snake racing, and if i got 2 inch coils would that be enough room for the 33's. im a newby so any info on coily zooks would be great.
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

wasnt some 1 workin on a 6 inchlift for coilys?
bigballs perhaps? :?
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

not shaw but that would be exelent. id be keen on that than i wouldnt have to do a 3 inch body lift :lol:
Top
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

i know sweet FA 'bout any of this kinda stuff, but this link covered stuff 'bout bodylift... 3" specifically
http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=7429
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

do a search there is a lot of info out there ;)

and yes i did i search and liam off this board (Bigballs) is workin on a 6 inch lift
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

i read that 3 inch body lift info, and i also was talking to a bloke a snake racing and he said thay are working on a zook 3 inch body lift 100% bolt on. so that sounded pritty good to me. this 6 suspension lift would be better than doin body lift, any idea how much it will cost.
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

pm liam mabey he can tell you :roll:
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 100
Joined: Wed Jun 02, 2004 7:21 pm

Post by Toj0 »

There's a coily in Brisbane running 33"s everyday and I've seen him running 36"s. Had to do a bit of work to get it though. He has 3" body lift and 6" suspension lift. Running a Rangie A-frame rear. Has GU rear shocksset at the angle with CRV rear coils, and VitRR front coils over Koni customs with raised seat.
Tojo
96 coily with bits to replace the bits I knocked off
Top
Posts: 101
Joined: Sat May 22, 2004 6:46 pm

Post by suzukisam »

to fit bigger than 32" on a coily it starts getting hard, the firewall is in the way and you have to lift high or sacrifice flex. even my 31" rub the firewall with 2" springs and 1.5" body. the spring lift does nothing if you are getting full flex as the tyre still stuffs into the guard just as much. if you run standard bumpstops you have to do a bodylift to stop the tyres chewing the guards out, or the guards chewing the tyres. I have hammered all the body seams flat inside the guards.

there are no aftermarket shocks available off the shelf for the front end, you have to go custom, i have made my own rancho coilovers using rs5117 and lancer springseats. I am using rancho rs9119 in the rear which are slightly too long but have extended the rear bumpstops by about 20mm to suit (mmmmmm plywood :D )

I might be getting some 32x9.5 (235/85 R16) soon if i get good $$ for my 31".

but i'm going onto no income soon so i had better watch my spending habits..... :roll:
Lester
96 SJ80V - it has coils from the factory!
Top
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

suzukisam wrote:I might be getting some 32x9.5 (235/85 R16) soon if i get good $$ for my 31".

but i'm going onto no income soon so i had better watch my spending habits..... :roll:


what 16" rims fit a zook :?:
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

mj wrote:
suzukisam wrote:I might be getting some 32x9.5 (235/85 R16) soon if i get good $$ for my 31".

but i'm going onto no income soon so i had better watch my spending habits..... :roll:


what 16" rims fit a zook :?:


Vitaras came with 16" rims and I used to have some of the old 16 x 5" from an LJ rims that I had the centres cut out and welded into lada Niva 16 x 6.5" outers
Ransom note = demand + collage
Top
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

grimbo wrote:
mj wrote:
suzukisam wrote:I might be getting some 32x9.5 (235/85 R16) soon if i get good $$ for my 31".

but i'm going onto no income soon so i had better watch my spending habits..... :roll:


what 16" rims fit a zook :?:


Vitaras came with 16" rims and I used to have some of the old 16 x 5" from an LJ rims that I had the centres cut out and welded into lada Niva 16 x 6.5" outers


well there you go I thought vits were all 15's :)
Top
Posts: 101
Joined: Sat May 22, 2004 6:46 pm

Post by suzukisam »

mj wrote:well there you go I thought vits were all 15's :)


grand vitaras are all on 16", 15" steelies don't fit over the brake caliper
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

young 'un

Post by Damo »

mj wrote:
grimbo wrote:
mj wrote:
suzukisam wrote:I might be getting some 32x9.5 (235/85 R16) soon if i get good $$ for my 31".

but i'm going onto no income soon so i had better watch my spending habits..... :roll:


what 16" rims fit a zook :?:


Vitaras came with 16" rims and I used to have some of the old 16 x 5" from an LJ rims that I had the centres cut out and welded into lada Niva 16 x 6.5" outers


well there you go I thought vits were all 15's :)


You thought wrong, Whippersnapper :finger:
Top
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Re: young 'un

Post by -Mick- »

Damo wrote:
mj wrote:
grimbo wrote:
mj wrote:
suzukisam wrote:I might be getting some 32x9.5 (235/85 R16) soon if i get good $$ for my 31".

but i'm going onto no income soon so i had better watch my spending habits..... :roll:


what 16" rims fit a zook :?:


Vitaras came with 16" rims and I used to have some of the old 16 x 5" from an LJ rims that I had the centres cut out and welded into lada Niva 16 x 6.5" outers


well there you go I thought vits were all 15's :)


You thought wrong, Whippersnapper :finger:


Happens all the time :P
Top
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

i guess i'm the only one that thought it odd that this thread came back from the dead :? :D
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

Toj0 wrote:There's a coily in Brisbane running 33"s everyday and I've seen him running 36"s. Had to do a bit of work to get it though. He has 3" body lift and 6" suspension lift. Running a Rangie A-frame rear. Has GU rear shocksset at the angle with CRV rear coils, and VitRR front coils over Koni customs with raised seat.


we need to see some pics of that. 36's and 9" of lift :shock:
Ransom note = demand + collage
Top
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

suzukisam wrote:to fit bigger than 32" on a coily it starts getting hard, the firewall is in the way and you have to lift high or sacrifice flex. even my 31" rub the firewall with 2" springs and 1.5" body. the spring lift does nothing if you are getting full flex as the tyre still stuffs into the guard just as much. if you run standard bumpstops you have to do a bodylift to stop the tyres chewing the guards out, or the guards chewing the tyres. I have hammered all the body seams flat inside the guards.

there are no aftermarket shocks available off the shelf for the front end, you have to go custom, i have made my own rancho coilovers using rs5117 and lancer springseats. I am using rancho rs9119 in the rear which are slightly too long but have extended the rear bumpstops by about 20mm to suit (mmmmmm plywood :D )

I might be getting some 32x9.5 (235/85 R16) soon if i get good $$ for my 31".

but i'm going onto no income soon so i had better watch my spending habits..... :roll:


Suki sam i got a 2" lift originally for my old spook from ultimate suspensions kit came with front shocks aswell as a little spacer that slide ova the shock bout 15mm or so in case you were runnin a aftermarket front bar to get it level..........i later got a new one machined up bout 25mm ...................... ( ilater found out tho that the springs were kings ther black paint rubbed off to reveal anice canary yella :roll: ........live and learn
[b][i] DAN [/i] [/b]


:silly:
Top
Posts: 2001
Joined: Wed May 26, 2004 9:47 pm
Location: sydney

Contact:
Contact runnin4life

Post by runnin4life »

my bro had a 4 inche lift on his hard top coily but his was custom made it was all good until he found his freind measured it wrong and it all went pair shaped but your best bet i would say if you cant find the kit you want is to look at geting a custom set of shockies and springs made
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

suzukisam wrote:there are no aftermarket shocks available off the shelf for the front end


with my 3 inch suspention kit i got aftermarket shocks for the front,they are called trailwin and are 4 way adjustiable. they are 2 inch longer than standard.
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 426
Joined: Sat Jan 31, 2004 11:28 am
Location: batemans bay

Post by xtreem »

zukin4life wrote:my bro had a 4 inche lift on his hard top coily but his was custom made it was all good until he found his freind measured it wrong and it all went pair shaped but your best bet i would say if you cant find the kit you want is to look at geting a custom set of shockies and springs made




Another golden post.
Please explain how your bro's mate measured it wrong it sounds hilarious. Did the springs or the shocks go pair shaped?
SUZUKI Remember anything else is a compromise.
Top
Posts: 101
Joined: Sat May 22, 2004 6:46 pm

Post by suzukisam »

stumped wrote:i guess i'm the only one that thought it odd that this thread came back from the dead :? :D


when you say "search newby" the dead is resurrected :D

I have not found anyone in NZ that can supply aftermarket shocks for a coilly front end without doing a custom setup

even suzuki NZ look at you twice when you try to get coilly parts

"SJ80?" they say - "oh that's an SJ413 version 8"
Lester
96 SJ80V - it has coils from the factory!
Top
Posts: 426
Joined: Sat Jan 31, 2004 11:28 am
Location: batemans bay

Post by xtreem »

Those shocks that RB is talking about are about 1 million bucks each :lol: I think they are imported from japan.
SUZUKI Remember anything else is a compromise.
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

RB zook wrote:
suzukisam wrote:there are no aftermarket shocks available off the shelf for the front end


with my 3 inch suspention kit i got aftermarket shocks for the front,they are called trailwin and are 4 way adjustiable. they are 2 inch longer than standard.


Do you know the part number for these babies

HRZOOK
Top
Posts: 2001
Joined: Wed May 26, 2004 9:47 pm
Location: sydney

Contact:
Contact runnin4life

Post by runnin4life »

well they measured it wrong sum how and the shocks were compressing to soon and ended up snaping off at the bottem
the springs the company stuffed up and put to many coils in it and then cus my bro's freind didnt tell him he needed to rotate the diff it started to tear off sum of the mounts
Top
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

zukin4life wrote:well they measured it wrong sum how and the shocks were compressing to soon and ended up snaping off at the bottem
the springs the company stuffed up and put to many coils in it and then cus my bro's freind didnt tell him he needed to rotate the diff it started to tear off sum of the mounts


was he running 6 coils or 8?? :D most guys i know run 4 ;)
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Top
Posts: 2001
Joined: Wed May 26, 2004 9:47 pm
Location: sydney

Contact:
Contact runnin4life

Post by runnin4life »

sorry i dont know the proper terms for it but it was as if they wound it around to many times like instead of it say having like 32 little loops in it it had like 40 if you get me probally not
Top
Posts: 100
Joined: Wed Jun 02, 2004 7:21 pm

Post by Toj0 »

Whet the appetite. The first is on 36's. Mine's only running 30's (the blue one), the other two are on 31" Simex. It's now running 33" Jungle Treckers
Tojo
96 coily with bits to replace the bits I knocked off
Top
Posts: 3552
Joined: Wed Apr 14, 2004 9:46 pm
Location: Ormond VIC

Post by muppet_man67 »

do you mind describing the details of your suspension mods?
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

muppet_man67 wrote:do you mind describing the details of your suspension mods?


Yes do tell.......please :)
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest