G'day guys,
I am very keen to do a SPOA conversion on the truck in the next few weeks and noticed some of you (Kingy, Screwy) have already done this. Not sure if it has been discussed in detail prior, (search function not working for me) however would like more details.
I have read about the front drivers side perch mounting issues. I guess what I really what to know now is;
Do you have to cut your knuckles and relocate them or are wedges suitable? What degree wedges are required to get half decient castor? How is the steering setup affected? ie. Does the steering rod hit the leafs? Are these cross over steering kits necessary? On the rear setup, should the spring perches be welded with any angle on them to help drive shaft angles? Any other clashes anyone come accross, things to think about? What would you do differently if you had to repeat it?
Hope this isn't to may questions. Thanks for your help guys?
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
SPOA on MK SWB Patrol
SPOA on MK SWB Patrol
84 MK Patrol SD33T, 35" pro comps, SOA, 3" straight through, York onboard air, roll bar
spoa
If you're in Gladstone QLD you will get put off the road with a SPOA
Who is online
Users browsing this forum: No registered users and 3 guests