Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Diff centres

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 43
Joined: Thu Apr 29, 2004 9:39 pm
Location: Slacks Creek (Brisbane)

Diff centres

Post by Raymond Spackman »

I was wondering if early model 40 cruiser diff centres (semi floating axels) go into later model 40 (full floating) diff. I have a couple of old style diffs & am wanting to know if these are ok to put in my 82 model housings & if axels are the same? the other question is do 60 series centres fit the late 40 diffs........ any help is greatly appreciated...... THANKS
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Gday the 60 ctr will fit straight in with the drive flange being the only difference. The early diffs will not fit because you need the ass end of the housing to come off to fit the circlips to the axles.
Andrew
Top
Posts: 43
Joined: Thu Apr 29, 2004 9:39 pm
Location: Slacks Creek (Brisbane)

Post by Raymond Spackman »

I mean axel splines. I realise the semi float axel needs a removable rear case. I just want to use the early centre with my late floating axels & housing. can this be done????????
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 143 guests