hey fellas
Does anyone know how much it would cost to rebuild a 3.5 rover engine.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
3.5 rebuild
Moderator: Micka
I just rebuilt one. Had Exchange Engine Supplies in Beenleigh do it for me.
I supplied them the bottom end still assembled and a pair of heads. They cleaned it, Serviced the heads which included knerling the exhast valve guides and lapped the valves. Honed the bores, linished the crank. And then assembled the bottom end. They supplied the complete re-build kit including Rings,Mains,Bigends,Timming Chain set and all gaskits. I supplied a new modified Cam and lifters and they installed it.
I bolted the heads and manifold back on myself.
Cost me around $1500 for the work they did.
I supplied them the bottom end still assembled and a pair of heads. They cleaned it, Serviced the heads which included knerling the exhast valve guides and lapped the valves. Honed the bores, linished the crank. And then assembled the bottom end. They supplied the complete re-build kit including Rings,Mains,Bigends,Timming Chain set and all gaskits. I supplied a new modified Cam and lifters and they installed it.
I bolted the heads and manifold back on myself.
Cost me around $1500 for the work they did.
Who is online
Users browsing this forum: No registered users and 2 guests