Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

A arm ball joint

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 435
Joined: Fri Jun 18, 2004 2:41 pm
Location: Perth

A arm ball joint

Post by steel »

The tapered sleeve on my rear axle housing is flogged out, so my ball joint clunks around & tightening casteleted nut just pulls the joint right through. Ive thought about cutting the plate & tapered section of a late model housing & welding it to my housing, but maybe I can do away with the balljoint & improve the link setup
Any ideas
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

a frame

Post by Loanrangie »

You could make a custom linkage using a hemispherical rod end, i'm not sure if its the right term but it can and has been done.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 435
Joined: Fri Jun 18, 2004 2:41 pm
Location: Perth

A arm balljoint

Post by steel »

hemispherical rod end? I thought I might utilise a rear radius arm to chassis bush. dont know I hav not put much thought into it yet. What about a Treg hitch , ala Mog rover , or a Heim joint
Jason
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

let me know what you come up with as I have to modify my aframe ball joint mount soon to correct the diff position.
Might go a adjustable heim joint, which is also what i am thinking of doin to my rear linkages at the chassis end.

Anthony
Top
Posts: 435
Joined: Fri Jun 18, 2004 2:41 pm
Location: Perth

Post by steel »

At the moment ive just sleeved the tapered section with ali coke can as a quick fix, worked good too. Will let u know what I end up doin, any more ideas folks?
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests