Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Installation instructions for a safari snorkel

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Installation instructions for a safari snorkel

Post by +dj_hansen+ »

Looking for the install instructions for a safari snorkel for a hilux/4runner, making a plumbers snorkel over the holidays and want to put the big hole in the right spot so i can fit a safari if im feeling a bit richer down the track.

Cheers :)
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Posts: 849
Joined: Fri Apr 23, 2004 12:30 pm
Location: Mornington, Vic

Post by MYTTUF »

Good plan.
Try going to a 4WD shop and seeing if they have any templates as they may keep them for a rainy day. Failing that go to a wrwecker and see if there are any holes in guards where snorkels have been and take a measurement.
Good Luck!
80 series, Locked both ends, Q78ed & a massive 57 k/w to boot!!!!

www.autobalance.com.au
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests