Hi from the uk.
My f70 (foutrack) 2.8d has no power to the front wheels, the prop is engaged but no drive. It isnt making nasty noises and i have been advised that i need to fit new manual locking hubs?
Any suggestions.
Also, are they easy to fit? its has free wheeling ones at the mo.
The swivel housing seal is also leaking, how difficult is this to fix.
And lastly, has anyone got advice on lifting these vehicles, i think that David (Bundyrumandcoke) has done this. Here in the uk parts and mods for Daihatsus dont exist so any drawings etc would be most welcome.
Sorry to ask so much but you guys are the best forum for daihatsus i have found.
Regards
Pete
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
f70 hubs and stuff
Moderator: Tiny
f70 hubs and stuff
A steep hill is called a cliff!
Hi,
Good Idea!
It's just a swap (6 bolts/screws). The challenge is to loosened it....
1. do a search on "torsion bar" and/or "suspension lift"
2. suspension lift or body lift?
Best,
Haasa
My f70 (foutrack) 2.8d has no power to the front wheels, the prop is engaged but no drive. It isnt making nasty noises and i have been advised that i need to fit new manual locking hubs?
Good Idea!
Also, are they easy to fit? its has free wheeling ones at the mo.
It's just a swap (6 bolts/screws). The challenge is to loosened it....
sorry, I don't knowThe swivel housing seal is also leaking, how difficult is this to fix.
And lastly, has anyone got advice on lifting these vehicles, i think that David (Bundyrumandcoke) has done this. Here in the uk parts and mods for Daihatsus dont exist so any drawings etc would be most welcome.
1. do a search on "torsion bar" and/or "suspension lift"
2. suspension lift or body lift?
Best,
Haasa
http://www.uahhh.org
88' Suzuki SJ413, 92' Daihatsu Feroza
88' Suzuki SJ413, 92' Daihatsu Feroza
Most F75's from what I can gather came out with the AVM hub, which I have had no trouble with. However I believe that AISIN also make a hub for them and no a Hilux hub will not fit, I have tried.
From memory however the swivel joint housing is identical to the hilux, I also know for a fact that the stub axles are identical, as mine is sitting on Hilux/80 series stub axles. (Though only the outer bearing in the Rocky is the same as a Hilux.) You may find that the seal from a Hilux/80 series will do the job.
Cheers,
Muddy
From memory however the swivel joint housing is identical to the hilux, I also know for a fact that the stub axles are identical, as mine is sitting on Hilux/80 series stub axles. (Though only the outer bearing in the Rocky is the same as a Hilux.) You may find that the seal from a Hilux/80 series will do the job.
Cheers,
Muddy
thanks guys
I want to do both, a suspension life and a body lift, +2" on both, so i need 4" longer shackles and 2" body blocks.
My old girl is leaf sprung all round.
Best regards
Pete
PS. Its the height of our summer in the UK and its still bl**dy raining and damp and cold. Am i jealous of Australian weather.....
To damn right
I want to do both, a suspension life and a body lift, +2" on both, so i need 4" longer shackles and 2" body blocks.
My old girl is leaf sprung all round.
Best regards
Pete
PS. Its the height of our summer in the UK and its still bl**dy raining and damp and cold. Am i jealous of Australian weather.....
To damn right
A steep hill is called a cliff!
Who is online
Users browsing this forum: No registered users and 39 guests