Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

any ideas...im stuck???

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

have you tried tightening the ubolts (think it was mentioned earlier)

i read on another site that this fixed one guys steering problems (off centre steering wheel) and also steering under brakes....
Posts: 388
Joined: Thu Oct 30, 2003 5:00 pm
Location: South Cast NSW

Post by Macca177 »

yup sure have tried that :) its all tight as
Cheers, Hayden!
________________
Posts: 428
Joined: Tue Oct 22, 2002 8:26 am
Location: The Sovereign Nation of Sealabia

Post by 2car »

Macca177 wrote:who knows....its guan go p/s and x/o very soon. is it okay to do this b4 dropping the hangers?


Will that fix it? What if it doesn't? You've spent a whole load of cash and it still dives. The are plenty of non-ps, non-xo luxes that don't pull under brakes.
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.

'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
Posts: 1055
Joined: Sun Nov 16, 2003 3:46 pm
Location: Inala Ponds

Post by basketcase »

Are the rear brakes locking up?? I thought if the front pulled to the right check the left rear brakes and vice versa.
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Have you checked all the Fuses?
Posts: 388
Joined: Thu Oct 30, 2003 5:00 pm
Location: South Cast NSW

Post by Macca177 »

Yeah it need to have the play fixed in the steering anyways. i was goign to leave p/s till last.

no the rear dont lock up...i dont even think the rear work.... i carnt adjust the rear as i need to replace the adjustersin the drums..they are frozen soild.... i think its basiclly 95% front braking.

No i have not checked the fuse's...ys that ?

i thought portion valuve may have air in it...my toyota manual says its possible.
Cheers, Hayden!
________________
Posts: 388
Joined: Thu Oct 30, 2003 5:00 pm
Location: South Cast NSW

Post by Macca177 »

oh and yeah the lux isnt bein drivin anymore....hehe so dont worry bout it on the road...ive borrowed a mates car:) its all guan get sorted hopefully in my holidays in july.
Cheers, Hayden!
________________
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

i found any slight braking difference between sides on the front was accentuated when my rears were frozen solid (76 fj40 though)...
Spit my last breath
Posts: 388
Joined: Thu Oct 30, 2003 5:00 pm
Location: South Cast NSW

Post by Macca177 »

yeah thanks all... i have a brake place on the look out for the rear brakes for me... and the steering is guna be booked in very soon.... will get dropped hangers at the same time to fit the steering in.

hopefully my problems will be sorted after that !!!!
so thanks again will let ya know after its all done..and fixed(hopefully)
Cheers, Hayden!
________________
Posts: 388
Joined: Thu Oct 30, 2003 5:00 pm
Location: South Cast NSW

Post by Macca177 »

Well its all fixed...goign X/o and gettin all the cracked welds fixed by replacing front X/member and gettin dropped at the same time fixed all....it now stays DEAD straight under any type of brakin.

thanks for all your help
:cool:
Cheers, Hayden!
________________
Posts: 498
Joined: Tue May 04, 2004 7:48 pm
Location: sydney

Post by HUNTERLUX »

simple and basic cheack your steering dampener cause mine done the same when the darndes thing happened out of no wher a heap of 1m high council whiches hats jumped out at me leaving me no chioce but to hit them he he he seriously check its not damaged :lol:
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests