v6 into type 1 suki?

Post by **Cluffy** » Fri Jul 02, 2004 1:47 pm

Anyone out there got any ideas for wedging a inj commo donk into a type 1 sierra? hoping to keep the slotted grille and orig box, rest is negotiable.
Currently on soa with 33 muddies, no test run yet as 1ltr donk fingered.

Post by **suzukisam** » Fri Jul 02, 2004 2:11 pm

there's a guy on our nzook forum that has a commy v6 and auto trans in his ?85? samurai (sierra to you guys). no idea what he's doing for a t-case, as he's gone to hilux axles (with coils).

Post by **moose** » Fri Jul 02, 2004 2:17 pm

OTIS
4WD monthly,s blue POS !!
Commo V6 , auto , hilux running gear !!!
Back issues have the full build up !!!!

Post by **Cluffy** » Fri Jul 02, 2004 2:31 pm

Ive seen the otis buildup and two problems,
1. waaaay out of my price range
2. dont have a t700 and huilux axles lyin round

also the road regs are different in W.A. no chance of getting lic with axles hanging out like that. Just trying to build a sleeper that can jump cruisers and tow busted nissans.

Post by **nicbeer** » Fri Jul 02, 2004 3:02 pm

In WA... goog luck. A mate had troubles trying to register a v6 commo motor and box into a 94 pathfinder. It could have been the nissan badge but who knows.

Good luck, just chuck it in there and worry about it when the cops ask you.

Nic

Post by **DeWsE** » Fri Jul 02, 2004 3:14 pm

I think the main reason the hilux diffs and t700 gearbox was used was to handle the increased power. I would say forget about getting it registered in WA and look at other engin swaps. Try keep it to a four and you might have a chance. Anyway whats wrong with a stock 1.3? if you want to pull pootrols out use low range! and if that doesn't work buy tcase reduction gears.

http://www.outerlimits4x4.com/PHP_Modul ... hp?t=21593

pic of a pootrol getting tugged by a zook

Post by **grimbo** » Fri Jul 02, 2004 3:47 pm

Cluffy wrote:Anyone out there got any ideas for wedging a inj commo donk into a type 1 sierra? hoping to keep the slotted grille and orig box, rest is negotiable.
Currently on soa with 33 muddies, no test run yet as 1ltr donk fingered.

To get it registerd you will need a lot of work for any engineer to accept a V6. Chassis strength, braking ability, diff strength etc. That was the main reason that Otis has Hilux running gear. You will be better off going for a Vitara 1.6.

As to jumping cruisers and towing broken nissans umm right.

i have pulled out quite a few Cruisers and hiluxes with my Zuk on a 1.3 engine.

A Commodore V6 is a big heavy engine that will be more of a hassle than anything else in a Zuk. Stick to a light weight engine and combie it with gearing to move your 33s

Post by **Gutless** » Fri Jul 02, 2004 5:58 pm

I have a V6 and auto in my sierra. I have pics, but can't host them ATM, so if you want me to email em to you I can.....

Post by **redzook** » Fri Jul 02, 2004 6:00 pm

u can post them on outerlimits straight off your machine

Post by **Gutless** » Fri Jul 02, 2004 6:08 pm

Sorry to have to ask, but how do I do this...

eg...

Post by **redzook** » Fri Jul 02, 2004 6:12 pm

under where u rite your message u will see a spot that says

ADD attahment u then click browse an look for the pic u want to add ( from your machine)

click the pic u want to upload then click ok then submit your post

Post by **DeWsE** » Fri Jul 02, 2004 6:16 pm

Note it is likely that the photo will need to be resized to 800 x 600 pixels and a max size of 100 kb

Post by **Gutless** » Fri Jul 02, 2004 6:55 pm

Thanks DeWsE, I've just been having probs with that

Post by **redzook** » Fri Jul 02, 2004 6:56 pm

here is gutless's zook with the v6

Post by **flyinwall** » Sat Jul 10, 2004 12:02 am

you could get real tricky and drop in a nissan vg20 v6 and its only 2000cc actually its a tad under 2000cc but anyhow might be your next bet

Post by **DRV11T** » Sat Jul 10, 2004 8:47 am

2.7L V6 Suzuki XL-7 in a Sierra

Post by **Gutless** » Sat Jul 10, 2004 11:11 am

Thats a neat install

what gearbox is it running?

How much power does that motor have, and where in the rev range in max power?

Would be revvy, as would the 2.0 V6 nissan motor.

Post by **Wesley** » Sat Jul 10, 2004 4:00 pm

Im in wa and lookin at puttin 35's on and hilux diffs in, i figure if they dont like the diffs sticking out ill shortn them and reverse the centres of my rims to give me the width. Im keepn the 1.3 shouldnt need any bigger with right gearing and with suspension set right should do swerve test no prob. last resort ill go 33's to pass pits then just change them.

Post by **bigsteve** » Sat Jul 10, 2004 11:35 pm

The Apprentice wrote:Im in wa and lookin at puttin 35's on and hilux diffs in, i figure if they dont like the diffs sticking out ill shortn them and reverse the centres of my rims to give me the width. Im keepn the 1.3 shouldnt need any bigger with right gearing and with suspension set right should do swerve test no prob. last resort ill go 33's to pass pits then just change them.

Wahot the ha

So you are going to 35's but on toy axles which are too wide so you are shortening them but may have to run 33's

Why not just bolt 33's on?? I reckon it'd be easier.

Outer Limits 4x4 Board

v6 into type 1 suki?

v6 into type 1 suki?

otis

Re: v6 into type 1 suki?

Who is online