Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

29 spline inner axle???

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

29 spline inner axle???

Post by RUFF »

Anyone know what has a 29spline inner axle and also has a 29spline outer stub shaft on the CV. We bought a heap of toyota CVs and Axles to treat and with them came this one odd Cv and inner axle. It also has the inner axle seal right down the bottom of the axle near the centre just like an open knuckle Dana does. We havent split it yet so dont know what spline count is inside the CV star end of the axle.
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

:?:
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

MQ
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Wendle wrote:MQ


You guessing or you sure?

It looks realy new thats all.
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

mq is definitely all 29 spline, and definitely has the pain-in-the-arse-oil-seal-at-the-wrong-end.
gq is 31 pline and had the same seal setup as your toyota stuff.

does it have NTN stamped on the bell?
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Yes it does. You are prob right then. Anyone out there running MQ CVs and breaking them lots? Want to try a Treated MQ Short side CV?
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest