Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

interior panel replacement

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 45
Joined: Wed Jun 30, 2004 10:12 pm
Location: Adelaide

interior panel replacement

Post by Mr.MojoRising »

Yo amigos
I want to replace te pooey masonite (i think) side panels from the inside of my MQ SWB. Anyone done this ? I'm wondering what to replace them with. Aluminium checkerplate would be ideal i reckon, but for the cost and the rice factor.
was also thinking of plain aluminium or stainless steel sheet. I dont really want to use plywood or any kind of wood, mainly because sawdust s#$%s me, and i'd be worried about it holding moisture. Plus i prefer working with metal.
Any ideas, hints, experiences, anecdotes leading to the thread being hijacked ?
Theres no going back now, i ripped the old ones taking them out. bloody plastic clips :x .
Top
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

use the old ones for templates ...
plain sheet aluminium or checker plate is good ...

back with with a thin sheet of foam so it doesn't rattle! ... rubber places have some water proof stuff ...

use nutcerts ... and use a nice dome head allan key bolt to hold in place
bling nice rice factor lol ...
who cares if its rice its practial and doesnt hold water
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Top
Posts: 45
Joined: Wed Jun 30, 2004 10:12 pm
Location: Adelaide

Post by Mr.MojoRising »

Hoonz wrote:bling nice rice factor lol ...
who cares if its rice its practial and doesnt hold water


fair call
rice and practical are mutually exclusive i suppose
although i dont know how many times my fully sik LED windscreen washers have saved me out in the bush. bro.
Top
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

it also doesn't rot ... they will never fall apart ...
they won't get smelly ... and they're easy to clean ...
get the plain sheet if u don't like rice ... i have checker plate cause
we have it laying around
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Top
Posts: 45
Joined: Wed Jun 30, 2004 10:12 pm
Location: Adelaide

Post by Mr.MojoRising »

any idea how much plain alum. and checkerplate cost per sq. metre ?
The local bunnings has sheets of c/plate approx 600x600 for $51. obviously it would be a fair bit less at a metal place but its still pretty dear.
Moneys a bit of an issue at the mo, not working much because of illness.
Top
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

dunno i got checker plate 2mx1.3m for $100
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Top
Posts: 434
Joined: Mon Apr 19, 2004 2:50 pm
Location: Tweed Coast

Post by I.M.P.O.S.E »

Anyone ever tried Laminex?
Nice and light. Plenty of choices. Seems fairly waterproof on the bench in my kitchen!

Dont know how strong it would be with a highlift or something smashing into it.
Top
Posts: 109
Joined: Mon Jun 14, 2004 5:28 pm
Location: Gippsland

Post by Cliffy »

Go the Ali checker plate, Like all the other guys said looks great and easy to clean, used to have it in my 40 series.... hose the doors down and scrub with a brush came up like new, go the captive but/button head cap screw idea like what Hoonz said, I went the pop rivet route PITA!!!!!
1990 FJ70, 1HZ turbo/inter, masterpiece in progress.
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

mmm nutcerts they rock, just got a nutcert tool, damn they make life easy
www.overkill4x4.com
ph 94766137
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

Mojo, Paramount Browns on Cavan Rd sell large sheets of ally chequer plate. They would have to be cheaper than Bunnings....

Another option I've used in the past is coloured perspex (or clear with marine carpet stuck on it.
David
Top
Posts: 109
Joined: Mon Jun 14, 2004 5:28 pm
Location: Gippsland

Post by Cliffy »

Ok did a quick search for nutcerts and tool, no such luck, spazbot where did you get your tool/nutcerts from, sounds like one of those must have tools and would do a great job :)
1990 FJ70, 1HZ turbo/inter, masterpiece in progress.
Top
Posts: 45
Joined: Wed Jun 30, 2004 10:12 pm
Location: Adelaide

Post by Mr.MojoRising »

fantastic cheers murcod i'll check them out, after all, you never know what you'll find there.
Top
Posts: 691
Joined: Thu Dec 26, 2002 11:21 pm
Location: Lebanon

Contact:
Contact DiscoDino

Post by DiscoDino »

Just did my Discovery 5 door 2 weeks ago with 2mm alum with 2mm checkerplate. Expensive, true, but worth every cent!

It was NOT that difficult actually, we did 4 panels each side (footwell, 2xdoors, rear inner fender) and the rear truck door, so 9 in total, took us 3 days as there is a lot of patience, and "correctly placed holes" to pull through.

We were able to save 34kg from the original s**t, and 4cm in room for the hips (I need it), so that was cool. Plus you can clean is very easily.

No pics yet. I'll get some and post in a month when I am back home :finger:
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

just make sure you bevel the edges of the panelsor you will find you will be cutting yourself on sharp edges
Ransom note = demand + collage
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

Cliffy wrote:Ok did a quick search for nutcerts and tool, no such luck, spazbot where did you get your tool/nutcerts from, sounds like one of those must have tools and would do a great job :)


think mine came from blackwoods, the old man bought it, ill see if i can get some details.
www.overkill4x4.com
ph 94766137
Top
Posts: 2097
Joined: Mon Jun 14, 2004 8:06 pm
Location: Land of Plenty

Post by blkmav »

I am about to replace mine and just bought waterproof carpet. It has a flexible plastic back. It weighs nothing and you can cut it to any shape with a jigsaw. Cost me $60 for enough to do two cars.
Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

blkmav wrote:I am about to replace mine and just bought waterproof carpet. It has a flexible plastic back. It weighs nothing and you can cut it to any shape with a jigsaw. Cost me $60 for enough to do two cars.


So the backing on the carpet is solid enough to use it as a panel?! What brand is it and where did you get it?
David
Top
Posts: 848
Joined: Fri Apr 02, 2004 12:01 pm
Location: Central Victoria

Post by Patroler »

I just used plain 1.6mm stainless sheet, decided against alu checkerplate as I rest my right foot against it to stop it bouncing around - so I wanted it reasonably smooth and didn't want alu on my shoes :D
There are no stupid questions, but there are a LOT of inquisitive idiots
Top
Posts: 2097
Joined: Mon Jun 14, 2004 8:06 pm
Location: Land of Plenty

Post by blkmav »

murcod wrote:
blkmav wrote:I am about to replace mine and just bought waterproof carpet. It has a flexible plastic back. It weighs nothing and you can cut it to any shape with a jigsaw. Cost me $60 for enough to do two cars.


So the backing on the carpet is solid enough to use it as a panel?! What brand is it and where did you get it?


Yes the backing is solid enough to hold its shape. I don't know the brand as I bought it from a market in 2m x 2m lengths. It looks like off-cuts.
Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Top
Posts: 1544
Joined: Fri Jan 03, 2003 10:33 am
Location: Wahgunyah(REDNECK WONDERLAND) Victoria

interior

Post by Webbie »

Yep im up to that piont too, but as previously sated im gunna use laminex as they have some prints and patterns available . checker plate is one of them, as for the strenght factor i'd like to see anyone go their interior with a knife, like you can on a bench top ;) :idea: :idea:
Lockers or Knockers ,both will make for fun.

HYBRID 4B PRDUCTS Visit Tigerz11 here http://www.tigerz11.com.au/ and LOCKTUP 4x4 here http://www.locktup4x4.com.au/ cheers

www.trailtrack4x4.com
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

How are you going to cut the laminex to shape without chipping the edges? Does a router or something like that work?
David
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

band saw works fine
www.overkill4x4.com
ph 94766137
Top
User avatar
V8Patrol
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

I went n saw the local Kitchen cabinet maker and he gave me 3ply with a white plastic backing sheet. The sheet 8'X4' cost a staggering $6.00 !!!

laid the old trims on the sheet and marked em out

cut it with a jigsaw

DONE :finger:

later on however I swaped em over ( side to side ) and covered them with vinyl.... also easy as and for the additional cost of $22.00 for the vinyl, foam backing and the glue they look just like the std trims only new and pretty :D
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Top
Posts: 154
Joined: Sat Dec 06, 2003 1:48 pm

Post by jabboo »

can you guys who have replaced your interior panels put up some photos of the finished product.

would give us all a visual reference.
Top
User avatar
V8Patrol
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

jabboo wrote:can you guys who have replaced your interior panels put up some photos of the finished product.

would give us all a visual reference.


I'd have to clean the back of the patrol out :shock:
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Top
Posts: 45
Joined: Wed Jun 30, 2004 10:12 pm
Location: Adelaide

Post by Mr.MojoRising »

what the freak is a nutcert ?
Top
User avatar
V8Patrol
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

Oh I forgot to add ......

Juddy did his black rigs interior during the respray... he did the same thing as I did only he covered the 3ply with "stick on" alloy checker plate, its cheap and not bad to look at .... try SuperCheap for the stuff.

I can get pics if your really insist :bad-words:

Kingy
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

Mr.MojoRising wrote:what the freak is a nutcert ?


AFAIK it's a tool that can fix captive nuts onto bodywork etc.
David
Top
Posts: 386
Joined: Mon Nov 03, 2003 9:24 pm
Location: Brisbane Southside

Contact:
Contact Leprecaun

Post by Leprecaun »

Will post mine up shortly, I did mine in Chqer Plate 1.6mm. Been a little bit of a bitch because of the rounded curves, but it looks pretty good now. I made a new panel which holds all my switches for lights, lockers, winch when I get one :), spotties, etc... Did it in lighted switches so that even when the car is off I know whats still on. :D
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 98 guests