Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Nissan L28 on Unleaded Fuels??

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 176
Joined: Wed Jun 09, 2004 8:43 pm
Location: South Brisbane

Nissan L28 on Unleaded Fuels??

Post by shortgq »

I have a L28 MQ shortie and am wondering whether anyone has used or would recommend using unleaded fuel in these engines??
Posts: 2056
Joined: Tue Mar 23, 2004 6:17 pm
Location: Melbourne

Post by Big Red Toy »

i do in mine, have done for 3 years now, no problems.
Style Side Maverick Ute
4.2 Turbo Diesel
35" Simex
4" Procomp suspension
2" Bodylift
Fibreglass Stuff....
Now highmount & Plasma :d
Posts: 86
Joined: Sat Nov 08, 2003 2:02 pm
Location: yarrawonga northen victoria

Post by buger man »

I had a 2.8 mq for 5 years run it on ulp all the time no problems :D
2001 pathfinder tjm(nissan ) alloy b/bar hella 160 d/lights ARB h/light loom , ipf d/light loom GME TX3400 UHF , 2 power outlets in back

www.yarrawongamulwala.com.au
Posts: 376
Joined: Mon Mar 22, 2004 8:31 pm
Location: Victoria, Outer eastern

Post by berazafi »

no problems put put bang put put bang,
Posts: 1032
Joined: Mon Mar 17, 2003 10:14 am
Location: Newcastle, NSW

Post by Heathx4 »

I run Super when I first bought the MQ (Sept 2003).
Then I went to unleaded and upper cylinder lubricant additive (lead replacement/valve seat protection stuff). It started to ping, and a timing adjustment fixed that. Then it started pinging a bit regardless of timing, and I've gone to PULP pretty much exclusively, without additive. Seems to be happy enough on that (for a noisy, tired, grumpy old engine).

Here's the evidence I used to convince myself ULP or even PULP was okay:

http://www.aip.com.au/health/lead_guide.htm
* Nothing is foolproof to a sufficiently talented fool *
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Post by Beastmavster »

Use PULP. ULP is too low octane for them but LRP is FAR FAR worse you'll foul your plugs in no time.

All L series nissans since 1973 were designed to be able to run on ULP (it was introduced in Japan about then). Most japanese engines (with the exclusion of a couple of australia only engines like later Toyo 18Rs or Pajero 2.6's when they'd been long ditched by japan) are in a similar boat.

I ran my L24 and L26 Zed engines on LPG with no modifications and I can guarantee they were tuned to twice the horsepower you're running but suffered no ill effects.

:D

If you're really fussed about it run some upper cylinder lubricant in your fuel, or another lead substitute fuel additive - most petrol stations sell at least ione brand or buy it in bulk at supercheap or Kmart..
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

When i had me L28 MQ i ran it on ULP all the time, all i had was some upper cylinder lube, that was ran on a dripp system that fed nto the manifold, ran no dramas, no pinging, and all that stuff......
Posts: 110
Joined: Sun Jul 04, 2004 7:22 pm
Location: Strathpine

Post by 84SwbPatrol »

Yeah i been runnign my l28 for the past 6 weeks now noticed it pinging on the beach .. adjusted timing and all is good ...
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

they run unleaded. LRP was never a fuel for this motor.
If running it on LRP successfully ur timing is out and u r paying too much fuel. Get your timing corrected and u will ping. So go back to unleaded the way it was ment to me.

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Post Reply

Who is online

Users browsing this forum: No registered users and 140 guests