Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

35's ON GQ

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 542
Joined: Wed Apr 28, 2004 10:28 am
Location: pomona,sunshine coast

Contact:
Contact GRINCH

35's ON GQ

Post by GRINCH »

can anyone tell me if 35x12.5x15's will fit on a gq wiyh 40mm body lift and 3" suspension without too much rubbing?
Top
Posts: 1508
Joined: Thu Jun 26, 2003 9:48 am

Post by MQ080 »

yes they should but you will find rubbing on the inside rear
Top
Posts: 1072
Joined: Thu Jun 17, 2004 4:38 pm
Location: Port Macquarie

Post by JemmyBubbles »

Hey boy..

I got a shorty w/ 4" coils gonna wack 50 mm blocks underneath the body to assist clearing 35" mtrs. What can you do, legally, to rectify the rubbing issues ? Is it a case of offset rims, bumpstop extension or other wise... Any advice ?
[quote="MSCHIF"]SPUA its like shaving a barbie dolls head, amusing but pointless.[/quote]
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

JemmyBubbles wrote:Hey boy..

I got a shorty w/ 4" coils gonna wack 50 mm blocks underneath the body to assist clearing 35" mtrs. What can you do, legally, to rectify the rubbing issues ? Is it a case of offset rims, bumpstop extension or other wise... Any advice ?


Toyota offset rims may fix up the problem, but it may still rub a tiny bit in some GQ's.

Each GQ is individual. you'll find one GQ will have this problem whereas the other doesnt :?
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

On a LWB they will rub on rear of front guards and on rear of rear guards under compression.

For front just move axle forwards with spacers and tube - 12mm - on lower radius arms and remove factory mudflaps. (replace with rubber sheet)

For rear have about 20mm or guards cut off and relipped up to about 250mm up blending in to orig line. Rubber sheet mudflaps again.

Bazzle :D
Top
Posts: 85
Joined: Wed Jun 02, 2004 11:26 am
Location: Homeless

Post by Dirty Dave »

hey even wit a five inch lift they still rub...bazzle is all over like a fat kid on smarty - wit the radius arm spacers and the rubber mudflaps.... the best thing you can do is lower the bump stop mounts this will also assist in the rig not rolling when you are in one of those postions when you wish you had done it a week ago. :cool:

Dirty D
Xtreme Bolt on Bandit....and your mum loves it!!!
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

...bazzle is all over like a fat kid on smarty - wit the radius arm spacers and the rubber mudflaps..

Explain Dirty Dave :twisted:

Bazzle
Top
Posts: 667
Joined: Mon Oct 27, 2003 6:26 pm
Location: Redcliffe

Post by Red Rover »

Mine has a 3 inch lift & 35 inch claws on toyota offset on 16's. Only rub a liitle on inside although i did use a heat gun to bend the flares at the rear of front flares & front of rear flares. So far so good
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests