I am after a wiring diagram for fitting a Hayman Reece brake controller.
Thanks,
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hayman Reece Brake controller
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Acording to my instructions,
BLACK---battery+, must go through 20A circuit breaker, close to battery
WHITE---ground-
RED------brakelight switch,on only when brake depressed
BLUE-----brake, to trailer connector
disconnect battery negative before wiring unit and use 3mm or larger wire.
Hope this helps.
Graeme.
BLACK---battery+, must go through 20A circuit breaker, close to battery
WHITE---ground-
RED------brakelight switch,on only when brake depressed
BLUE-----brake, to trailer connector
disconnect battery negative before wiring unit and use 3mm or larger wire.
Hope this helps.
Graeme.
Allways been a TOYOTA man.
Now I'm old and grumpy as well.
Now I'm old and grumpy as well.
Who is online
Users browsing this forum: No registered users and 3 guests