Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Not really 4x4 tech, but i need to find an offcut mob in Sydney for alloy. All the big places like Alspec and O'Briens will only sell me full lengths, which in the size i need, are 6.5m long , and i only need about 1500mm of the stuff. I cant see the point in buying 6.5m of it, cos the rest will be useless to me.
Sizes i need are:-
- 25mm x 25mm Square Hollow Section, 3mm wall thickness, x 1500mm long
- 31.75mm x 31.75mm Square hollow Section, 3.2mm wall thickness, x 1500mm long
Anyone help me then??
Phill
1995 DX 80 series, brought to you by:- 1HDFTE, A750, PWR, Secret Squirrell Steinbauer, BFG, GME, Engel, ARB, Kaymar, and my empty wallet!
You could try Ullrich at Smithfield or Capral.Capral used to charge $2.00 a cut , Ullrich have a minimum charge for cutting I can’t recall the amount
Charlie
, and i only need about 1500mm of the stuff. I cant see the point in buying 6.5m of it, cos the rest will be useless to me.
