Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

RR body panels

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 100
Joined: Mon Jun 23, 2003 9:05 pm
Location: Rosvale Qld (south of 'Switch)

RR body panels

Post by mu-stu »

Anyone know anywhere which sells replacement panels for Rangies in OZ, e.g. inner sills, etc? Cooper's don't and they aren't aware of anyone (plenty in the UK - don't like the postage though!!). What have you guys done to replace the rusty bits?!! Cheers, Stu
Top
Posts: 211
Joined: Sat Jun 19, 2004 1:32 pm
Location: Endeavour Hills - Vic

Post by cmcd »

What have you guys done to replace the rusty bits?!!


I cut the appropriate bits out of the wreck in the back yard.. :D

I've got some pics over here -> http://www.aulro.com/modules.php?set_albumName=album24&op=modload&name=gallery&file=index&include=view_album.php (Note: There's two pages there)

For the footwells, I used some 3mm galvanized sheet, which was sprayed with "Rustkill Black", and pop-riveted down to the floor after putting an appropriate bend in it to suit the floor.

Macca
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 2 guests