Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Reversing light mounted to GQ wheel spare holder.

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
User avatar
DB
Posts: 18
Joined: Tue May 11, 2004 6:06 pm
Location: Melbourne

Reversing light mounted to GQ wheel spare holder.

Post by DB »

I want to fit an extra light to the spare holder. I have figured out all the mounting details except for where to rout the wires from the vehicle to the light.
I would like to stick well clear of cutting & drilling. Is there a simple way to rout the wire from the car through the door and out on to the spares mount?
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Reversing light mounted to GQ wheel spare holder.

Post by bogged »

DB wrote:I want to fit an extra light to the spare holder. I have figured out all the mounting details except for where to rout the wires from the vehicle to the light.
I would like to stick well clear of cutting & drilling. Is there a simple way to rout the wire from the car through the door and out on to the spares mount?


I run my wire out of the back against the rubber... Other than that, start drillin...
Top
Posts: 1170
Joined: Tue Jun 01, 2004 4:27 pm
Location: Goodna, Queensland

Post by Bartso »

Don't know if you want to do this but i removed one of the lower bolts

from the spare wheel carrier or you could try to drill through the bolt, you

might be able to get one all ready made up but anyway i removed the

bolt and ran the cable through the door that way then siliconed it up :D
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
Top
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Contact:
Contact CRUSHU

Post by CRUSHU »

maybe you can be really tricky, and swap one bolt for a banjo bolt. has a hole thru the middle, and out the side.
www.CVEPerformance.com

Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

For my rear aerial I just drilled a hole behind wheel carrier, painted edge, fitted a tight grommet, and ran wire thru this into door, and thru flexible rubber tube that wiper and speaker wires run thru.

Bazzle
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 5 guests