Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ARB Suspension advice

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 31
Joined: Wed Jul 07, 2004 5:33 pm
Location: Gold Coast

ARB Suspension advice

Post by Canetoad »

Sent an email to ARB Gold Coast to ask about the maximum hieght spring lift I could get using OME springs and LTR shocks, to which I got the following reply "THE LEGAL HIGHT YOU CAN LIFT IS 50MM TOTAL WITH OME SUSPENSION YOU MAY GET A BIT MORE LIFT DEPENDING ON IF YOUR NISSAN HAS SAGGED OVER TIME" Is this true, is every truck in QLD with over 50mm of lift illegal in QLD or are these guys pulling my leg.
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

do a search on here as there have been many topics about the legality of modifications, Also contact Qld roads or dept of Transport (whoever handles that ) and ask them. But yes it does appear they are telling you the truth. You can get other heights done but will need an engineers report I believe
Ransom note = demand + collage
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

Actually.. the RULE is....

THe suspension may be raised no more than one third of the bump stop i think...

works out to be 2.7 or so inches :roll:

But for everyone else... its only illegal when you get caught... :twisted: :twisted:

some people just drive around with big lifts.. get caught.. they get asked to go to mainroads for checkup to see if its illegal if you dispute it i believe... - then go home.. change to standard,, go there pay a fee and get approved... then put your big lift back on :twisted: :twisted:
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

99% of suspensions are rated for a given load. An ARB etc will be higher or lower at different loads, physics.
For them to try to remain within the eyes of the law they cant state higher.

So a 50mm lift with constant 200kg will sit a bit higher unloaded.

Bazzle
Top
Posts: 4323
Joined: Wed Dec 11, 2002 8:42 am
Location: Gold Coast, Queensland

Contact:
Contact HeathGQ

Post by HeathGQ »

http://www.transport.qld.gov.au/qt/driv ... ations.pdf

try this......
Heath & Melissa - 93 GQ LWB.
Top
Posts: 1072
Joined: Thu Jun 17, 2004 4:38 pm
Location: Port Macquarie

Post by JemmyBubbles »

That pamphlet has MQ propaganda in it.

It may give off the impression that all MQ's have dodgy bullbars...

:?
[quote="MSCHIF"]SPUA its like shaving a barbie dolls head, amusing but pointless.[/quote]
Top
Posts: 386
Joined: Mon Nov 03, 2003 9:24 pm
Location: Brisbane Southside

Contact:
Contact Leprecaun

Post by Leprecaun »

The law in QLD now states that you can only have a 2"body lift and a 2"suspension lift. Most people have more as they had these modification before this law came into effect. As Bazzle said if you get a heavy rated loading springs/shocks you will actually sit higher than the 2" mark but that itself is not illegal. I have just spent some time trying to get the most lift out of mine!
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 56 guests