mate of mine has just got an 83 or 84 model rangie and we have heard some rumours that you can put 80 series springs in the front and gq's in the rear to give a bit of lift.
can anyone tell if this is true or not???
thanks
Josh
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
different springs in rangie
Moderator: Micka
Tell me about it
The Kings actually made my Ranghie worse off-road and the front end stood up constantly, especially with the air locker in!!
This also caused a couple of broken 10 spliners. This was enevitable though with 32 inch MT/R's. The kings are too stiff for Rangie, but LRA have the best rannge of springs available.
Good luck,
Trav

This also caused a couple of broken 10 spliners. This was enevitable though with 32 inch MT/R's. The kings are too stiff for Rangie, but LRA have the best rannge of springs available.
Good luck,
Trav
Land Rover- The Collingwood of 4WD's!!!!
Who is online
Users browsing this forum: No registered users and 3 guests