Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
PICS OF THE ZOOK FORUM RIGS
89 Sierra std 1.3 5 speed
30mm bodylift
2 inch enforcer springs ome shocks
31" MTR's
ARB winch bar
Rollbar
Aluminium checkerplate sill and fuel tank guards
Snorkel into glovebox
Rear lockright in, front in
Rock sliders
Custom rear bar
S3 rockhoppers
GTI motor to go in soon.
30mm bodylift
2 inch enforcer springs ome shocks
31" MTR's
ARB winch bar
Rollbar
Aluminium checkerplate sill and fuel tank guards
Snorkel into glovebox
Rear lockright in, front in
Rock sliders
Custom rear bar
S3 rockhoppers
GTI motor to go in soon.
You do not have the required permissions to view the files attached to this post.
Last edited by Toos on Wed Feb 23, 2005 4:55 pm, edited 5 times in total.
4 Pot Screama
David's Zook
I live in Sydney owned my Zook for only a month, also have a Vitara.
85 Longie wide track
Front and rear lockers
Transfers gears
Extended Shakles / Drop shakles
3 " body Lift
custom drive shafts
1.3lt motor
custom springs
Rancho's all round
Sprung Over
Custom Exhaust / extractors
85 Longie wide track
Front and rear lockers
Transfers gears
Extended Shakles / Drop shakles
3 " body Lift
custom drive shafts
1.3lt motor
custom springs
Rancho's all round
Sprung Over
Custom Exhaust / extractors
Last edited by Mudboy on Wed Apr 18, 2012 11:03 am, edited 1 time in total.
1983 SJ410
87 Swift GTi engine
SJ410 gearbox, 4.16 transfer
Standard front and rear diffs
Offset spokies on 31 x 9.5 handcut tyres
6 point external cage
legacy radiatior in the rear
Swift fuel tank (intank pump)
hardtop cut down to half cab
cut guards and sills
custome front and rear bumpers
No Future mods because I have got a new Zuk...
97 Samurai
Standard engine/drivetrain
2" lifter coils
offset spokies on 31x10.5 MTs
offset spokies on 31x10.5 ATs
Custom front radius arms (castor corrected/strengthened)
Mods to come.......
Damage the SJ410 so I can swap the engine in.
rockhopper (currently being built)
rollbar
modify front bar to house a winch of some form
Rex
NZ
87 Swift GTi engine
SJ410 gearbox, 4.16 transfer
Standard front and rear diffs
Offset spokies on 31 x 9.5 handcut tyres
6 point external cage
legacy radiatior in the rear
Swift fuel tank (intank pump)
hardtop cut down to half cab
cut guards and sills
custome front and rear bumpers
No Future mods because I have got a new Zuk...
97 Samurai
Standard engine/drivetrain
2" lifter coils
offset spokies on 31x10.5 MTs
offset spokies on 31x10.5 ATs
Custom front radius arms (castor corrected/strengthened)
Mods to come.......
Damage the SJ410 so I can swap the engine in.
rockhopper (currently being built)
rollbar
modify front bar to house a winch of some form
Rex
NZ
Suzuki
Holden Drover project vehicle.
High top hard top 1985, needs TLC.
Currently very dodgy. Adding some daihatsu feroza seats, and just trying to get it roadworthy before major mods... Yeah, the second 4wd. Baby bro to the fatroll!!!!!!!!!!
High top hard top 1985, needs TLC.
Currently very dodgy. Adding some daihatsu feroza seats, and just trying to get it roadworthy before major mods... Yeah, the second 4wd. Baby bro to the fatroll!!!!!!!!!!
??????????????
Finally got some pics with crap digi
Specs for my Zuk:
1988 Wide Track Sierra
Red (Pic looks a bit orange)
Removable Resin Top
235/75 on 15x7 Trak 2
2" Body Lift
Bullbar
Custom Light Bar with 4 Roof Lights
Another member of the "Plastic Flare Wide Track Group"
Plans
SPOA
34" JT2s
5.1 Diff Gears
UPDATE: Now own 34" Swamper LTBs on 2.5in backspace rims, will be on soon
Specs for my Zuk:
1988 Wide Track Sierra
Red (Pic looks a bit orange)
Removable Resin Top
235/75 on 15x7 Trak 2
2" Body Lift
Bullbar
Custom Light Bar with 4 Roof Lights
Another member of the "Plastic Flare Wide Track Group"
Plans
SPOA
34" JT2s
5.1 Diff Gears
UPDATE: Now own 34" Swamper LTBs on 2.5in backspace rims, will be on soon
You do not have the required permissions to view the files attached to this post.
Last edited by Mudzuki on Sun Feb 06, 2005 2:34 pm, edited 2 times in total.
Gday guys,
1985 Sierra 1.3 5 speed Pereshut Red
Hardtop JX SWB
30 inch motorway mud terrains
1.5 inch shackle lift
50mm body lift
painted flares
extended breathers, diff and tcase
tinted windows
scratches etc.
Mods to come, homemade snorkle, aluminium
dobson head
Sillbars
Piccies>
Only one extended shackle at this time, bumpers removed as body lift just went in, need to make some brackets.
I call her Redzook Jr.
http://groups.msn.com/4x4tasmania/brennospics.msnw?action=ShowPhoto&PhotoID=372
http://groups.msn.com/4x4tasmania/brennospics.msnw?action=ShowPhoto&PhotoID=371
1985 Sierra 1.3 5 speed Pereshut Red
Hardtop JX SWB
30 inch motorway mud terrains
1.5 inch shackle lift
50mm body lift
painted flares
extended breathers, diff and tcase
tinted windows
scratches etc.
Mods to come, homemade snorkle, aluminium
dobson head
Sillbars
Piccies>
Only one extended shackle at this time, bumpers removed as body lift just went in, need to make some brackets.
I call her Redzook Jr.
http://groups.msn.com/4x4tasmania/brennospics.msnw?action=ShowPhoto&PhotoID=372
http://groups.msn.com/4x4tasmania/brennospics.msnw?action=ShowPhoto&PhotoID=371
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Spike_Sierra wrote:Gday guys,
1985 Sierra 1.3 5 speed Pereshut Red
Hardtop JX SWB
30 inch motorway mud terrains
1.5 inch shackle lift
50mm body lift
painted flares
extended breathers, diff and tcase
tinted windows
scratches etc.
Mods to come, homemade snorkle, aluminium
dobson head
Sillbars
Piccies>
Only one extended shackle at this time, bumpers removed as body lift just went in, need to make some brackets.
I call her Redzook Jr.
http://groups.msn.com/4x4tasmania/brennospics.msnw?action=ShowPhoto&PhotoID=372
http://groups.msn.com/4x4tasmania/brennospics.msnw?action=ShowPhoto&PhotoID=371
is it just me or have u only got extended shackles on the passanger side?
i rember just after mine was painted
Yeah, i had just put on side in to see how much more lift i had got, i still needed to take them off again to paint and add RHS box section in the middle. But ive got all four on now
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
yodi here aka suzi-freak
live north of brisbane
got a 92 lwb vite jlx auto
stock standard
new motor .020 oversize
new cheese cutter tyres
have owned 4 sierras previously and 2 landcruisers, go the ZOOKS!!
married with kids so money is scarce
however, wish list:
3" lift
detroit rear
235/75's on 7" rims
rigid front like celias
extractors...uhf.. stereo.. etc
live north of brisbane
got a 92 lwb vite jlx auto
stock standard
new motor .020 oversize
new cheese cutter tyres
have owned 4 sierras previously and 2 landcruisers, go the ZOOKS!!
married with kids so money is scarce
however, wish list:
3" lift
detroit rear
235/75's on 7" rims
rigid front like celias
extractors...uhf.. stereo.. etc
hey just registered the other day im dayne and just finished high skool...i drive a 86 siera its dark blue with a fibr glass canope its my second 4by i had a sIII landy which i sold to get a zook . its stock standard down to the dodgy tyres. i plan on doin a 2 inch body lift extending the shakles and fitin some 30 inch tyres
welcome to the board glad to no im not the only young one here (im 16)
98 Xtra Cab Lux.... slowly filling up with the Budscustoms Catalogue : Street, Track & Trail - Parts & Fabrication
Budscustoms Facebook Page
Budscustoms Facebook Page
my zook
howdy my name is Benny
have an 81 tin top
2" body lift
3" lift springs with 2 leaves removed
1.3 roller engine with mild cam 5 spd g/b
painted bright yellow or orange if you live up near newcastle or at nelson bay chances are youve probably seen it
31" a/t front and 2nd hand bf a/t rear couldnt afford new ones on 15x8 F100 rims
1.3lt running gear much better than the 1lt
have home made snorkel just needs a rampod
cut bullbar
cibie super oscars
uhf
have an 81 tin top
2" body lift
3" lift springs with 2 leaves removed
1.3 roller engine with mild cam 5 spd g/b
painted bright yellow or orange if you live up near newcastle or at nelson bay chances are youve probably seen it
31" a/t front and 2nd hand bf a/t rear couldnt afford new ones on 15x8 F100 rims
1.3lt running gear much better than the 1lt
have home made snorkel just needs a rampod
cut bullbar
cibie super oscars
uhf
You do not have the required permissions to view the files attached to this post.
Last edited by bennybigballs on Fri Jan 14, 2005 10:29 pm, edited 3 times in total.
There are no problems
Only solutions
Only solutions
Hi
my zook is a 98 coily
4" spring lift
2" body lift
simex 32" centepedes
9000 winch
home made bar work front back and sides
rancho 5000 shocks all round
rockhopper s3
arb air locker in rear
snorkel
and now some battle scars
and a bent rear trailing arm :(
[/img]
my zook is a 98 coily
4" spring lift
2" body lift
simex 32" centepedes
9000 winch
home made bar work front back and sides
rancho 5000 shocks all round
rockhopper s3
arb air locker in rear
snorkel
and now some battle scars
and a bent rear trailing arm :(
[/img]
You do not have the required permissions to view the files attached to this post.
Last edited by Gareth on Sat Jan 22, 2005 8:25 pm, edited 1 time in total.
Gareth wrote:Hi
my zook is a 98 coily
4" spring lift
2" body lift
simex 32" centepedes
9000 winch
home made bar work front back and sides
rancho 5000 shocks all round
rockhopper s3
arb air locker in rear
snorkel
[/img]
mate need pics
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Had my pos for a while never been happy with it tryed to sell if for ages then tryed to just sell suspension no one was intrested so i guess im stuck with it. Sorta started doin up another one got yj springs n crap though it will prob have to wait till i buy a house now.
92 sierra, 5" lift, 31 wrangler mtr's etc not doin any more mods to this pos. Ive learnt a lot from the mistakes ive made on this project though i will lose money its still no as much as some other ppl i know have lost on there vehicles ill prob end up just sellin this to my brother for a good price
and make another one.
here is a pic click on the shortcut at the bottom for more pic's
92 sierra, 5" lift, 31 wrangler mtr's etc not doin any more mods to this pos. Ive learnt a lot from the mistakes ive made on this project though i will lose money its still no as much as some other ppl i know have lost on there vehicles ill prob end up just sellin this to my brother for a good price
and make another one.
here is a pic click on the shortcut at the bottom for more pic's
Hi everybody!
This is my rig:
- stretched swb to lwb with rear alu/square tubed rear, tubed front
- 4.16 t-case with trailtough bucket armor
- stock engine and gearbox
- stock axles with birfield cups, breeze inc. oversteering
- SOA on stock leaf springs and 9012 ranchos
- 34x9.5 swampers
- comeup dv9000i winch with synthetic rope
soon to be on TLC-72 axles, 35x14.5 boggers, coils, powersteering, bobbed lwb body tub, cage, etc
This is my rig:
- stretched swb to lwb with rear alu/square tubed rear, tubed front
- 4.16 t-case with trailtough bucket armor
- stock engine and gearbox
- stock axles with birfield cups, breeze inc. oversteering
- SOA on stock leaf springs and 9012 ranchos
- 34x9.5 swampers
- comeup dv9000i winch with synthetic rope
soon to be on TLC-72 axles, 35x14.5 boggers, coils, powersteering, bobbed lwb body tub, cage, etc
Who is online
Users browsing this forum: No registered users and 41 guests