Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

help with price on 4.2 petrol motor

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 25
Joined: Sun May 09, 2004 10:33 pm
Location: melbourne

Contact:
Contact rohan canavan

help with price on 4.2 petrol motor

Post by rohan canavan »

l have a gq swb ,just put a gen 111 into it ,and wish to sell the motor and gas setup .could someone please help me with price for the motor.the motor is in good condition and 225000km on the clock.non efi but sold complete
Top
Posts: 13
Joined: Fri Jul 16, 2004 9:40 pm
Location: Maitland N.S.W

Post by golly_01 »

was thinking of doing the same thing to mine .... how hard was the job ....
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: help with price on 4.2 petrol motor

Post by bogged »

rohan canavan wrote:l have a gq swb ,just put a gen 111 into it ,and wish to sell the motor and gas setup .could someone please help me with price for the motor.the motor is in good condition and 225000km on the clock.non efi but sold complete


Check the forsale section been quite a few in there for $400-700ish. but with that many klms on it, probably the low price.

Let me no, might have a mate interested, his just shititself AGAIN last week.
Top
Posts: 1170
Joined: Tue Jun 01, 2004 4:27 pm
Location: Goodna, Queensland

Post by Bartso »

I sold mine with a buggered head gasket for a carton of beer i just

wanted to get rid of it
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
Top
Posts: 146
Joined: Wed Nov 13, 2002 2:43 pm
Location: outside the migration zone

Post by Snatchy »

i eventually managed to sell a good one, running in the car with only 91k for $1750. People do want them to replace ones with cracked heads. keep advertising for a while and you should be able to get rid of it. As said above, $750 would be about all you would get for it from what i have seen.
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

Yeah now tell us about the Gen III!
This is not legal advice.
Top
Posts: 716
Joined: Tue Jan 13, 2004 7:24 pm
Location: Melbourne

Post by TUFFRANGIE »

Gday Rohan,

Are you going to put the supercharger on it or wait a while and see how it goes?

I'll have to come and have a look at it and I nearly have the money for your old bullbar if you still have it.

Thanks

P.s. The vibration in my car was due to the wheels, i put Trav's 31's on it and there was no vibration
Top
Posts: 25
Joined: Sun May 09, 2004 10:33 pm
Location: melbourne

Contact:
Contact rohan canavan

gen 111

Post by rohan canavan »

gen 111 into patrol not hard just a lot of time,the hardest part was exhaust .had to make own extactors,again just time .
motor in and running ,chev clutch ,motec computer for engine management.
hi rob the supercharger is here but will run the motor in before l put it on,that is if l need it.we have done alot off work to the motor,it may be alright without the supercharger.
l still have the bull bar for you rob.

l will put some photos on when l remember to bring the camera to work
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests