What Rims for 35 Claws or Boggers?

Post by **glen1n** » Mon Jul 19, 2004 3:53 pm

i wanna run two sets of tyres when i get me bias baja claws (35x13.5x16 – 6 ply) and need to get some sunray's but unsure of the size, obviously 16 inch but what bout the width? 16x8 or 16x10?

Cheers bigfellas
Glen

Post by **redzook** » Mon Jul 19, 2004 4:17 pm

glen1n wrote:i wanna run two sets of tyres when i get me bias baja claws (35x13.5x16 – 6 ply) and need to get some sunray's but unsure of the size, obviously 16 inch but what bout the width? 16x8 or 16x10?

Cheers bigfellas
Glen

if ya gettin 2 sets of tires why not swampers?
btw i reckon 8's

Post by **glen1n** » Mon Jul 19, 2004 4:23 pm

yer have thought about it but if i cant get a good deal on the boggers they are to expensive brand new, but yer boggers are an option, would the same rim size be ok for boggers aswell?

Post by **CRUSHU** » Mon Jul 19, 2004 5:20 pm

there is a set of boggers for sale cheap in the for sale section.

Post by **glen1n** » Mon Jul 19, 2004 6:02 pm

not interested in buying tyres yet, only rims, but hopefully they will still be there whn i get enough money, honey.

also what about offset, do i need to worry if i have spacers on the front?

Post by **Fathillbilly** » Mon Jul 19, 2004 6:35 pm

you will need to run a 10" rim,

the minimum rim size for a 12.5" is 8.5" so if you are going wider than that you are going to have to go you to a 10" rim

Stu

Post by **redzook** » Mon Jul 19, 2004 6:56 pm

Fathillbilly wrote:you will need to run a 10" rim,

the minimum rim size for a 12.5" is 8.5" so if you are going wider than that you are going to have to go you to a 10" rim

Stu

why will he need to run a 10 inch rim?

Post by **glen1n** » Mon Jul 19, 2004 7:30 pm

cause if what he is saying is correct then the next size up from 16x8 is 16x10. More opions would be nice peoples

Post by **Grantw** » Mon Jul 19, 2004 7:31 pm

Im running 35/13.5-16 on 16x8 rims with no worries. The claws only measure 12.5 anyway.

Post by **beebee** » Mon Jul 19, 2004 9:15 pm

I'm running 37x13.5x15 Boggers on 15x8 rims without any major problems. I have glued the beads on though. The smaller rim just means that you have less sidewall exposed and there is more pressure holding the beads onto the rim. IMHO

Post by **BIG GQ** » Mon Jul 19, 2004 9:52 pm

I to am running 37x13.50x15 8ply claws on 15x8 rims and often run them at 14psi(no locks yet) and have only ever popped 1 tyre of the bead and that was just me being stupid

Cheers
Linc

Post by **V8Patrol** » Mon Jul 19, 2004 11:27 pm

38.5 TSL Swampers on 8" sunnys ! ... also simex tubes

Will hopefully be beadlocked before the next trip out ..... now where did I put me VISA :armsup:

Post by **Daisy** » Tue Jul 20, 2004 1:39 am

36x13 swampers on 16x8 rims as well.

Post by **glen1n** » Tue Jul 20, 2004 9:08 am

well it looks like it doesnt really matter which i get. but seen the 8's are around more chances are i'll probably get a set of em.

Cheers, o well off to the wanted section to post!

Post by **Wooders** » Tue Jul 20, 2004 12:28 pm

36x12.5 TSL's on 15x8's here too - oh yeah beadlocked.....

I'd pick the 8" rim just about every time IMHO.....

Post by **glen1n** » Tue Jul 20, 2004 2:12 pm

these seem the go

http://www.outerlimits4x4.com/PHP_Modul ... hp?t=22737

Outer Limits 4x4 Board

What Rims for 35 Claws or Boggers?

What Rims for 35 Claws or Boggers?

Re: What Rims for 35 Claws?

re

Who is online