Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Are Nissan body to roof pillars more prone to cracking?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 9
Joined: Thu Jul 08, 2004 4:57 pm
Location: Mordialloc, Victoria

Are Nissan body to roof pillars more prone to cracking?

Post by nigeljarvis »

Before I start; this post is for a nominally biased Toyota friend of mine who's considering buying either a Nissan Patrol GQ or GU or a Nissan Navara (diesels in each case).

We've both heard that the Nissan drivelines are "unbreakable" and I've heard that the build quality of Nissan's are better than their previous reputation (eg. their bodies are more solid than Toyota's - read that in an old 4wd monthly mag).

HOWEVER, my father on two separate trips (one to rural Queensland and the other to Whitecliffs or Whitfield or something - rural NSW) was told the same negative anecdote by two independant four wheel drivers (who both drove Toyotas):

"Ah, don't get one of those Nissans, mate! When they come in from the bush they're all cracked around the tops of the pillars."

Thinking that this was a little to coincidental to be mere Toyota bias I thought I'd check it out on this forum to see what you all have to say.

Anyway, your honest answers, experience and expertise would be greatly appreciated.

Thanks in advance, Nigel

P.S. I drive a Rangie, but prefer Nissan's to Toyota's since they went independant. I only wish Nissan made a troopcarrier type 4wd like Toyota and Landrover - with a big diesel and rigid axle, coil sprung susp. and big tyres as standard. Keep staying true and rigid, Nissan!!!
1988 Rangie 4.4l p76 with MD fr. & rr. diff locks on 33"x12.5x15 Cooper muddies, etc. etc.

"For the amazing views, smell of a freshly caught fish cooking on my campfire and the feel of a waterfall shower!"
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Are Nissan body to roof pillars more prone to cracking?

Post by bogged »

depends how many tons people put in roofracks.

some people carry far too much, then complain when the car spits the dummy.

Saying that, they have had a few go. Check my URL for a check list of shit to look for on GQ.s

GQ will shit on a Navara offroad.
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

I see lots of 4bys every day. Seen many Toys cracked. Never seen a broken Nissan. (pillars to roof)

bazzle
Posts: 1361
Joined: Thu Oct 24, 2002 8:47 pm
Location: Now in a happy place.

Post by Cheezy4x4 »

I second Bazzle. ;)
NOW ABLE TOO SAY WHAT I WANT WITHOUT FEAR OF LOOSING SALES.
The person who says it cannot be done should not interrupt the person doing it.
Posts: 569
Joined: Sun Jan 11, 2004 11:36 am
Location: Sunshine Coast QLD

Cracks

Post by Mark2 »

I've heard somewhere that the GQ turret structure is rated to carry more load than a Toyota. That maybe why you tend to see a lot of car topper boats on GQ's. (Usually towing a van as well)

80 Series cruisers used on corrugations commonly crack the C piller at the bottom of the glassline. (Visible when opening the rear doors)
I've seen major cracking in the chassis of leaf sprung landcruisers, but also seen a GQ chassis crack around the steering box.

Having said that, my GQ has done a lot of corrugated road work, usually with a roof rack. The rear door has cracked as well as the rear side doors and the passenger side floor pan. The roof pillars are fine as is the chassis.

Bottom line is, everything is going to crack eventually. Corrugations = metal fatigue.
Posts: 10
Joined: Tue Jun 08, 2004 8:08 pm
Location: busted

Post by battle wagon »

ive rolled my gq on its side 3 times and its f***en bent but no crackes.
is ur truck still goin?
yeah goin 2 HELL!!
Posts: 146
Joined: Wed Nov 13, 2002 2:43 pm
Location: outside the migration zone

Post by Snatchy »

I've seen major cracking in the chassis of leaf sprung landcruisers, but also seen a GQ chassis crack around the steering box.

Chassis crack on early GQ near the steering box was the subject of a recall
Posts: 273
Joined: Fri Jul 30, 2004 6:39 pm
Location: cranbourne

Re: Are Nissan body to roof pillars more prone to cracking?

Post by embryo »

[quote="bogged"]depends how many tons people put in roofracks.

some people carry far too much, then complain when the car spits the dummy.

me and a mate did the simpson last year, had a roof rack with 8 legs and it bent the sh** out of his gutters to the point that we couldnt open the door to get the beer out of the fridge :x ,
We had 2 swags a spare 32" muddy on a rim and 60ltrs of diesel in jerrys (wont do that again!) but it didnt crack at the pillar. so with a roof rack make sure its a full guttermount.
The the window frames (if you dont have toyota style quater windows in the front) crack at the base becase the area is to large unsupported and the windows rattle more when window is not wound all the way up or down
dont tell the missus
Posts: 625
Joined: Fri Feb 20, 2004 12:04 am
Location: Melbourne

Post by Woop »

I think that part of the recall for chassis cracking around the steering box, was an extra bracket bolted to the panard rod bracket to prevent flexing..

Nick
Posts: 27
Joined: Wed Jul 07, 2004 10:46 pm
Location: philippines

Post by kamote09 »

hello,

Was planning to have a custom roof rack with 8-10 legs on my LWB MK...I was wondering...would anyone know the load limit of the gutters? any idea at all?

I've heard that defender 110's have a ton load limit? does an MK's come close to this figure?

TIA
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests