Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Aisin Manual Hubs ?

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 62
Joined: Mon May 12, 2003 8:54 pm
Location: Wollongong

Aisin Manual Hubs ?

Post by revnkev »

Frank mentioned in a previous post
but since fitting Aisin manual hubs (from a Triton) I haven't had any
trouble.

Do these hubs fit the 2.8 Diesel ( 3.5 V6 ) front end as well ?
Or only the 3.0 V6 ?
Also what year model Triton are they off ?
Thanks, any info is appreciated :)
95 GLX LWB 2.8lt ITD Pajero
Custom Rear Bar & Rockslides
33x12.5 MTZ's ,TJM XGS shocks,Rear Airbags
Top
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Yes they will Kev, the outer splines are the same on all Gen 2's so the Aisin manual hubs of a base model Paj diesel or a Triton will fit.
They won't fit an NM onwards however as they have fixed (non removable) hub flanges.
I just luv my "clacker Jabber"
Top
Posts: 62
Joined: Mon May 12, 2003 8:54 pm
Location: Wollongong

Post by revnkev »

Thanks for that Frank,
was hoping that was the case, I can get AVM manual hubs from
TJM or ARB but they want $225 a set ,was hoping the Aisin ones
would be a cheaper option. :)
Hope all is going well with your SAS and those other trans
gears ;)
95 GLX LWB 2.8lt ITD Pajero
Custom Rear Bar & Rockslides
33x12.5 MTZ's ,TJM XGS shocks,Rear Airbags
Top
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Kev, don't buy the AVM ones I did as they are plastic and strip the Allen keys easily I had probs with mine.
I got my Aisin ones from Smart Parts in Ballarat for $150 / set ph - (03)5334 1806 Geoff is the man.
I just luv my "clacker Jabber"
Top
Posts: 62
Joined: Mon May 12, 2003 8:54 pm
Location: Wollongong

Post by revnkev »

Thanks for the advice Frank,
you are a wealth of Mitsubishi knowledge :)
95 GLX LWB 2.8lt ITD Pajero
Custom Rear Bar & Rockslides
33x12.5 MTZ's ,TJM XGS shocks,Rear Airbags
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest