Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
dead 3b
Moderators: toaddog, Elmo, DUDELUX
dead 3b
need to find some information for the brother, he has a 74 shorty with a dead 3b and he wants to replace that with a 2f and retain his t/case and shafts. question is , is this possible without too much drama ie g/box output shaft,length of 2f,engine mounts etc. have rtead somewhere that 2f has 4 eng mounts thanks in advance shayne
best way to do it would be pull the engine, gearbox and transfer from the donor vehicle and fit it - a 2F will not bolt up to the gearbox in that truck. of it's the stock motor in a '74 it would be a B, not a 3B. the early 2F's used 4 engine mounts and the gearbox/transfer hung off the back, later models used a more 'conventional' setup with 2 mounts on the engine and one under the gearbox on a crossmember. you're looking at a pretty big job on a vehicle that in all honesty probably isn't worth investing the time in.
what's wrong with the "dead" diesel?
cheers
Brian
what's wrong with the "dead" diesel?
cheers
Brian
Free air locker to the first 20 callers!
sorry dumbdunce iv,e posted this and pis@ed off doing what ya do so the story is he,s had a wild knock that went away when it came back. it was all over , pulled the head, massive damage in the barrels. he rang me the other night ,told me he could pick up a 2f on the cheap would it match up to his existing g/box . answer / no fefen idea = ask ol4x4 not so worryed elec etc but would like to know if it.s possible without too much drama if it is what would be his best avenue $ wise
bottom line is the 2F won't go in where the B/3B is without gearbox mods, so the cheapest thing to do is try and get another B motor to bolt in there, otherwise get a 2F with the gearbox etc and drop that in, fabricate engine mounts etc if necessary.
might even be cheaper to try and pick up a V8 conversion but that's only cheap if you can pick up all the bits for cheap.
good luck
might even be cheaper to try and pick up a V8 conversion but that's only cheap if you can pick up all the bits for cheap.
good luck
Free air locker to the first 20 callers!
ferrit wrote:2F is the big 6cyl thirsty as all hell petrol isnt it?
correct... although it comes down to how you drive. I used to have a FJ40 and if I was very very careful I could get it down to 12 - 13 litres/100km. but mostly it was fun to drive fast and get lousy economy
Free air locker to the first 20 callers!
Who is online
Users browsing this forum: No registered users and 1 guest