Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

40 series 4 link

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 614
Joined: Tue Jul 27, 2004 7:47 pm
Location: Penrith

Contact:
Contact UZJ40

40 series 4 link

Post by UZJ40 »

Am building a 40series from the ground up. I have put a 1UZFE, 4.0lt V8 in with a 100series 5 speed an transfer. This was quite simple to put in.
the body is being done at the moment, next job is the suspension.

has anyone done or can help with advice on doing a 4 link front and rear on it?

any advice or help would be greatly appreciated.
Top
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

Can't help with the link tech as I run an old skool leaf setup ;)

But post up pics of your build up. The donk and tranny setup sound wicked :cool:

Oh yeah - Welcome :armsup:
Top
User avatar
DIRTY ROCK STAR
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

t

Post by DIRTY ROCK STAR »

mate, DAZ could be your man. hes got coils in his 40, or is doing them.

and yeah welcome tiger.

looks like Dan could have some competition in the 40 stakes.
Top
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Re: t

Post by Shorty40 »

DIRTY ROCK STAR wrote:mate, DAZ could be your man. hes got coils in his 40, or is doing them.

and yeah welcome tiger.

looks like Dan could have some competition in the 40 stakes.


Whatcha talkin 'bout Willis :?:

Pffffttttt, he is no competition for me ........................... he doesn't have suspension yet :lol:

Hang on, ANY rig is better atm, me no engine worky :cry:
Top
Posts: 78
Joined: Mon Jul 12, 2004 5:50 pm
Location: Newcastle, NSW

Post by MrForty »

Hey guys, is hard to put coils in a 40?
Top
Posts: 354
Joined: Tue May 27, 2003 7:50 pm
Location: sutherland

mmmmmm

Post by dreama »

its gunna need quite the setup to out drive dan
Top
Posts: 78
Joined: Mon Jul 12, 2004 5:50 pm
Location: Newcastle, NSW

Post by MrForty »

Oh yea, and good to see another newbie, good to have you abord UZJ40
Top
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

40sNewbie wrote:Hey guys, is hard to put coils in a 40?


theres a fair bit of work in it. and you gotta be spot on with your welding skills if you ever want it street legal. also depends on what link setup you go. you could go factory arms (most use 3 links) / 4 link (A-frame) / 5 link.


UZJ40, as i said in the other forum, go a 5 link up front. A-frame/4 link rear.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests