Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Question for suspension GODS

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 33
Joined: Sat May 24, 2003 8:44 pm
Location: Canterbury, New Zealand

Question for suspension GODS

Post by simonwalker »

Hello all Gods

Is there any good reason why you dont see two 1/4 eliptic springs on each side,like 2 link bars,for use in the rear.

Thoughts ideas--pros/cons

:)
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Re: Question for suspension GODS

Post by bigsteve »

simonwalker wrote:Hello all Gods

Is there any good reason why you dont see two 1/4 eliptic springs on each side,like 2 link bars,for use in the rear.

Thoughts ideas--pros/cons

:)


If you mean 2 each side ie. 4 in total I think that would be very stiff and wouldn't flex at all.
yeshemesh
Top
Posts: 1732
Joined: Tue Feb 11, 2003 11:23 am
Location: Goulburn

Re: Question for suspension GODS

Post by MY45 »

bigsteve wrote:
simonwalker wrote:Hello all Gods

Is there any good reason why you dont see two 1/4 eliptic springs on each side,like 2 link bars,for use in the rear.

Thoughts ideas--pros/cons

:)


If you mean 2 each side ie. 4 in total I think that would be very stiff and wouldn't flex at all.


Nice idea :cool: ...... but i think for the setup to work each spring pack woud have to be very soft, which is fine but from what you said above you wanted to use each pack as a link. The problem would be that because the packs would be so soft they would flex and be ineffective as links.....hope that answered it ..... tell me if ive got ur idea wrong

Adam
----HillBilly Engineering----
Top
Posts: 33
Joined: Sat May 24, 2003 8:44 pm
Location: Canterbury, New Zealand

Post by simonwalker »

Hi Guys

Yes Adam you have the right idea,so to work through this,the top spring would mainly have pulling ant the bottom pushing,could mounting the springs in a curtain way help avoid this or would you have to build a anti wrap bar :?:

Cheers Simon
Top
Posts: 1732
Joined: Tue Feb 11, 2003 11:23 am
Location: Goulburn

Post by MY45 »

I personally would just go for a 4 link (A Frame) and just 1/4 elliptic. would be much more predictable and less could go wrong with it.
----HillBilly Engineering----
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests