Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

35's on an MK SWB

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 766
Joined: Mon Dec 30, 2002 3:08 pm
Location: Melbourne

35's on an MK SWB

Post by jtraf »

Hello all,

Currently running 33/12.5/15 on 15x8 on my SWB 85 Patrol SD33T

Bought the car with these tyres on it. Have been 4x4ing heaps and these
tyres have not rubbed at all. I assume that the car has been raised a couple of inches to clear this rubber and also to compensate for the weight of the bar, roof rack, long range tank etc.

I am now wanting to get a set of 35in MTR's to go out an play with.

What else will I have to do to get these on. Patrol has the orginal metal wide wheel flares on it as well. Will I have to raise the body and lose the flares or will tyres clear with the flares only removed. Or can I raise the body and keep the flares or would rubber flairs be better.

What have others done in the past cause I don't want to buy the tryes to find that I have to spend another grand to make them fit.

cheers

James
Top
Posts: 283
Joined: Fri Nov 01, 2002 1:16 pm
Location: Rowville, VIC

Post by .MYTLUX. »

just do a body lift, they are cheap as.

MKpatrolguy runs 35"s on his im sure he woud know how much lift is required.
Blair,

90 2.8D HILUX s/c
33" BFG m/t
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

you could always borrow a set of some one and flex it up and see where it rubs. And to save damage to tyres in doing this just drive up ramp with a mate checking clearance.
Only problem with this is that off-road the car will flex more than it will on a ramp.

Turps
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

The forklift method works well for this, 'cause you can pick up whatever corner you need to and get the other corner to full stuff. The only thing is that in the real world the axle will move a little bit under torque as well....
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

James,
As Blair said I'm running 35s on my LWB MK, I have a 2" body lift and around 2-3" suspension lift (not sure on the exact height, was fitted when I bought the Patrol and it has settled a bit and I have mucked with the number of leaves a bit). In the front the tyres clear everything fine, but in the rear you will find under compression the tyres will rub on the guard on the front and the back of the opening. Nothing some minor (or major if you feel like it :D ) trimming wont fix, I just cut my mashed rear quarters off completely to fix half the problem :D . Oh and I have the generic rubber flares, dunno how much difference that makes though.

Hope that helps,
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest