Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Landrover buildup

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 1813
Joined: Sun Oct 20, 2002 3:31 pm

Landrover buildup

Post by Strange Rover »

Im going to post pics of my landrover buildup here.

This things going to be ready for XRCC round 1 on the 22 March. So I got shiat loads to do.

I have fairly well much got everything I need to do it so basically I just got to nail it all together.

Sam
Posts: 1813
Joined: Sun Oct 20, 2002 3:31 pm

Post by Strange Rover »

Got clearance.

The biggest problem with these diffs is how tall the diff is and the problems it creates with clearance with the engine. Its just a matter of seeing how low I can get it.

Sam
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

what sorta body you putting on it sam? the old blue beast? full tube?
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

antt wrote:what sorta body you putting on it sam? the old blue beast? full tube?


See the yellow forklift in the background of the first pic :shock: :shock:
Posts: 1404
Joined: Tue Jan 07, 2003 9:20 pm
Location: Sitting on Miss Janes lap.

Post by Drafty »

Nothing gets past you Ruff, good pickup.


Very funny :lol:
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Drafty wrote:Nothing gets past you Ruff, good pickup.


Very funny :lol:


Im not joking i work for Sam and we are going to start cutting it up tommorow case its allready a single seater and its got a cage and hyro steering.
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

RUFF wrote:
antt wrote:what sorta body you putting on it sam? the old blue beast? full tube?


See the yellow forklift in the background of the first pic :shock: :shock:


it's all right ruff, just calm down and take deeep breaths, that's it, the forklift isn't going to hurt you :finger:
Posts: 1404
Joined: Tue Jan 07, 2003 9:20 pm
Location: Sitting on Miss Janes lap.

Post by Drafty »

Leave the front forks on and you can just lift the rocks out of the way.
Posts: 1813
Joined: Sun Oct 20, 2002 3:31 pm

Post by Strange Rover »

antt wrote:what sorta body you putting on it sam? the old blue beast? full tube?


Yup - same blue rover

Sam
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

geez you build them low! :shock: that is still lower than my POS :o
hands and mums dont count!!!
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

Neat suspension ... that's gunna be a soft ride! :silly:

But will it flex? :wink:
KRiS
Posts: 1813
Joined: Sun Oct 20, 2002 3:31 pm

Post by Strange Rover »

Got all the links tacked in. Running 4 parallel links plus panhard in front and a triangulated three link in the rear. Motor to front diff and linkages clearance is very close but I am happy with how low this hing is turning out although it will probably have a higher ride height than before.

Sam
Posts: 1813
Joined: Sun Oct 20, 2002 3:31 pm

Post by Strange Rover »

Oh yea - also got the morox/gearbox/transfer sitting in place ready to make mounts for it. Motor is sitting a few inches forward of where I was origionally planning which is a bonous.

Sam
Posts: 1813
Joined: Sun Oct 20, 2002 3:31 pm

Post by Strange Rover »

Just in case anyone is wondering the suspension is sitting on the bump stops with no springs in it so I can see where the motor/box can go for clearance.

Ride height will be about 4in higher than this.

Sam
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

Strange Rover wrote:Just in case anyone is wondering the suspension is sitting on the bump stops with no springs in it so I can see where the motor/box can go for clearance.

Ride height will be about 4in higher than this.




10-4 ... just checking. :wink:
KRiS
Posts: 58
Joined: Mon Oct 28, 2002 11:54 am
Location: USA (OZ some day!)

Post by Adam »

why cant i see any of the pics? when i click on them i just get "file not found" :(
Adam
1964 Land Rover 88", modifications in progress
Posts: 1813
Joined: Sun Oct 20, 2002 3:31 pm

Post by Strange Rover »

Adam wrote:why cant i see any of the pics? when i click on them i just get "file not found" :(


I think its just you - the pics have been downloaded a fair few times by other people. Is it just these pics or all pics that are posted on this board?

When you click on them they should open up in a new window.

Sam
Posts: 58
Joined: Mon Oct 28, 2002 11:54 am
Location: USA (OZ some day!)

Post by Adam »

all the pics, i will ask my tech-guru dad if he can figure it out, its quite aggravating.

but its only this site, all other sites are fine?

and i cant see the thumbnail either, its just a red X
Adam
1964 Land Rover 88", modifications in progress
Posts: 211
Joined: Wed Dec 18, 2002 8:17 pm
Location: Moura

Post by Carl Coight »

It's gunna look good Sam. Plans have changed, so i won't be at xrcc but i will hopefully be at the next one. Can you post more pics allong the way?
Cheers Carl.

P.S. What material and size are you using for your suspension links?
Live fast, die young and have a bloody good looking corpse.
Posts: 73
Joined: Tue Feb 25, 2003 8:24 am
Location: Qld Darling Downs

Post by baby_troupe »

Adam wrote:all the pics, i will ask my tech-guru dad if he can figure it out, its quite aggravating.

but its only this site, all other sites are fine?

and i cant see the thumbnail either, its just a red X


Check to see what your PC is using to open jpg type files. You may need to reassociate the file extensions to an app which is on your PC to fix. :silly:
http://www.baby-troupe.i8.com
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Looks Good Sam, I like the design. I can't wait to see it in action - Are you going to be taking it up to Manar at easter?

Are you going to keep the MOG drums or run discs? Traction control???
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

too cool
Posts: 1813
Joined: Sun Oct 20, 2002 3:31 pm

Post by Strange Rover »

ISUZUROVER wrote:Looks Good Sam, I like the design. I can't wait to see it in action - Are you going to be taking it up to Manar at easter?

Are you going to keep the MOG drums or run discs? Traction control???


I should be with it at Manar at easter.

Goint to keep the drums and will have the traction control as well as the factory diff locks.

Sam
Posts: 1813
Joined: Sun Oct 20, 2002 3:31 pm

Post by Strange Rover »

Did I trial fit up of the body and it looks very short (may get a longer one) but it will do for the tim being. May move it an inch forward from this.

Sam
Posts: 1813
Joined: Sun Oct 20, 2002 3:31 pm

Post by Strange Rover »

Got ground clearance - about 460mm under the lowest part of the pumpkin.

Sam
User avatar
Aza
Posts: 3886
Joined: Thu Dec 12, 2002 4:41 pm
Location: Loganholme, Qld

Post by Aza »

only one word for it AWESOME cant wait to see it on the rocks :twisted:
98 Xtra Cab Lux.... slowly filling up with the Budscustoms Catalogue : Street, Track & Trail - Parts & Fabrication
Budscustoms Facebook Page
Posts: 373
Joined: Mon Oct 28, 2002 12:37 am
Location: Toowoomba

Post by toymad »

Looks like you boys have been busy! Looks like it sould be pretty stable. nice and L O N G and W I D E 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8)
How much wider and longer is it? Cant wait to see it finished :D :D :D :D :D :D
The ORIGINAL[color=yellow]Team Rocksolid[/color]
TRD....TOYOTA ROCKCRAWLING DEVELOPMENT
SUPERIOR SPRINGWORKS Toowoomba
EFS Suspension
Garry Stevens SIGNS
http://www.myspace.com/toymad
Posts: 384
Joined: Sun Oct 20, 2002 8:26 pm
Location: Springfield/ QLD

Post by CJer »

looking good SAM :)
Posts: 1813
Joined: Sun Oct 20, 2002 3:31 pm

Post by Strange Rover »

toymad wrote:Looks like you boys have been busy! Looks like it sould be pretty stable. nice and L O N G and W I D E 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8)
How much wider and longer is it? Cant wait to see it finished :D :D :D :D :D :D


Its about 12in longer from 100in to 112in and its 100mm wider from 2100mm to 2200mm.

Sam
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

Strange Rover wrote:Did I trial fit up of the body and it looks very short (may get a longer one) but it will do for the tim being. May move it an inch forward from this.

Sam


KEEP THAT BODY :D :D

That looks too COOL 8) 8) 8)
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests