Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

hj60 trans nioses

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 78
Joined: Tue Oct 28, 2003 9:18 pm
Location: blue mtns

hj60 trans nioses

Post by da60 »

Can someone pls help me, I have a hj60 5speed and it has just started to develop a ticking noise which is more noticable when cold and on the over-run and accompanied by a clicking sound every once and a while, my thoughts are this problem is worn mainshaft bearings. The 60 has 250k's does a fair bit of hard off-road work has anyone else had similar symptoms it's only done it for about 60k's since it developed so i'm hoping a bearing kit will fix the prob.
XJ 2'lift, 30's and HIDS
Posts: 615
Joined: Tue Feb 11, 2003 4:59 pm
Location: Geelong Vic

Post by Ruggers »

does it do it with the clutch in or out or both as a nosiey loose throw out bearing will have a knocking noise
HZJ73, lifted,crawler gears, double locked, sitting on 35's
Posts: 78
Joined: Tue Oct 28, 2003 9:18 pm
Location: blue mtns

Post by da60 »

ONLY WHEN THE CLUTCH IS OUT.
XJ 2'lift, 30's and HIDS
Posts: 568
Joined: Fri Jan 10, 2003 6:38 pm
Location: Darwin

Post by Sixty »

silly question.....your hubs locked in? Might be the cv's.....



or some prick has put a ziptie on your propshaft.... :twisted:
Luv the sound of a diesel,
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.

The bigger the boy, the bigger the TOY!!
Posts: 78
Joined: Tue Oct 28, 2003 9:18 pm
Location: blue mtns

Post by da60 »

hubs unlocked, it is similar in sound to if you try and engage 4wd without the front hubs locked in, if you have ever made that silly mistake (i have) but slower. Does anyone know what type of sound worn mainshaft bearings make?
XJ 2'lift, 30's and HIDS
Posts: 568
Joined: Fri Jan 10, 2003 6:38 pm
Location: Darwin

Post by Sixty »

sounds like it could be the throwout brg
Luv the sound of a diesel,
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.

The bigger the boy, the bigger the TOY!!
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests