Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

how to get 1st gen diesel tacho to 308 working help???

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 1544
Joined: Fri Jan 03, 2003 10:33 am
Location: Wahgunyah(REDNECK WONDERLAND) Victoria

how to get 1st gen diesel tacho to 308 working help???

Post by Webbie »

Ive got a 1st gen as stated my mates got his 253 hooked up to his tacho and we both r unsure of how its done as it was already like it when it was purchased, and i want to do the same but with a 308, :roll: :?:
Lockers or Knockers ,both will make for fun.

HYBRID 4B PRDUCTS Visit Tigerz11 here http://www.tigerz11.com.au/ and LOCKTUP 4x4 here http://www.locktup4x4.com.au/ cheers

www.trailtrack4x4.com
Top
Posts: 1544
Joined: Fri Jan 03, 2003 10:33 am
Location: Wahgunyah(REDNECK WONDERLAND) Victoria

1 st gen

Post by Webbie »

ANYONE as i know there are heaps of our conversions out there in OL world. ;)
Lockers or Knockers ,both will make for fun.

HYBRID 4B PRDUCTS Visit Tigerz11 here http://www.tigerz11.com.au/ and LOCKTUP 4x4 here http://www.locktup4x4.com.au/ cheers

www.trailtrack4x4.com
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Re: how to get 1st gen diesel tacho to 308 working help???

Post by dumbdunce »

gtwebbie wrote:Ive got a 1st gen as stated my mates got his 253 hooked up to his tacho and we both r unsure of how its done as it was already like it when it was purchased, and i want to do the same but with a 308, :roll: :?:


can you duplicate whatever is driving the tacho in your mate's truck? trace the wires attached to the - side of the coil - one of them will go to the points (or electronics module if you have electronic ignition), the other should go to the module that is driving the tacho. you might be able to pull it apart and reverse engineer it? if not you might have to cough up for a converter from Marks or someone else.
Free air locker to the first 20 callers!
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 0 guests