Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ center in GU housing?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 34
Joined: Wed Oct 23, 2002 5:16 am
Location: Brisbane , Australia

GQ center in GU housing?

Post by givathafat »

We are looking into getting a gu front diff for the tomato and was wondering if the gq center will.

1. bolt into the housing,

2. fit the Gu Cv's.

3. Gq manual hubs fit instead of gu auto ones.

Thanks
Dave Crook
You've Gotta Luv Steel
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Re: GQ center in GU housing?

Post by turps »

givathafat wrote:We are looking into getting a gu front diff for the tomato and was wondering if the gq center will.

1. bolt into the housing,

2. fit the Gu Cv's.

3. Gq manual hubs fit instead of gu auto ones.

Thanks
Dave Crook



GQ hubs fit GU's
GQ airlocker will fit into and work in a GU fron with mods. Not sure what they are, but think it is new bearings (due to bigger axle - I lied sorry, read below) and something else
GU CV's take alot of pounding before they brake.
Last edited by turps on Thu Aug 12, 2004 12:48 pm, edited 1 time in total.
THOUGHT FOR THE DAY....
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

just swap the whole centre, carrier and all. the differences are in the crown wheel fitting, which won't worry you if you swap the whole lot.
GU axles aren't bigger, they are the same as GQ, 32mm 31 spline inner and outer.
Posts: 34
Joined: Wed Oct 23, 2002 5:16 am
Location: Brisbane , Australia

Post by givathafat »

thanks for that ,

I think that's the way we might go :lol:
You've Gotta Luv Steel
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests