Hi guys,
Possibly not strictly 4x4 but I am after an alloy pulley, to suit a 13mm vee belt, with a centre (shaft) hole no more than 12.8mm.
Diameter (where the belt is seated) anything from 55 to 75mm.
Used to have no trouble finding stuff like this back in Vic, but I'm not sure where to get it in Brisbane (preferably northside).
Anyone got any suggestions? We are making a 12V test bench with an alternator driven by a 240V motor. It's going to be quite useful.
Jason
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
alloy pulley
Moderators: toaddog, TWISTY, V8Patrol, Moderators
alloy pulley
This is not legal advice.
Who is online
Users browsing this forum: No registered users and 1 guest