Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GU front bearings?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 435
Joined: Fri Jun 18, 2004 2:41 pm
Location: Perth

GU front bearings?

Post by steel »

I've just finished reading another topic, [rear wheel bearing on GQ], & was suprised to read how difficult rear replacement is.
Well I was about to attempt the front bearings on my 2000 GU & was planning on just feeling my way through it.
I cut my teeth on full time 4WD rovers & they're dead easy to do [ front & rear bearings are same].
Can someone outline the job for me or should I just take it to a 4WD workshop?
Top
Posts: 625
Joined: Fri Feb 20, 2004 12:04 am
Location: Melbourne

Post by Woop »

The topic has been covered before. Do a search. If you've done a Rover before, you will find the Nissan very similar except that grease used in the CV's instead of Oil. Bearing pre-load is set with a plate with screws rather than the large nut as in a Rover.

Nick
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests