Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

engine oil cooler

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 73
Joined: Thu Aug 12, 2004 2:04 pm
Location: perth

engine oil cooler

Post by vraamm »

I have a remote engine oil cooler fitted to my 40 series 350 chev. it was left over from when i was running the oldsmobile 350 diesel which had oil pressure problems.... anyway, there is no regulation of when the engine oil passes through the cooler at the moment. Is this normal? I got some fittings (T-piece with tap and one way valve) so that I can turn the tap to allow for the oil to go through the cooler or when turned the other way the oil will bypass the cooler. Is this a good idea? or not necessary? Am i right in thinking that its not a good idea to have cold oil going through the cooler? Are there legality issues with doing this mod?
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

Some cars have them standard, V6 triton is one that pops to mind.
Top
User avatar
DAZ
Posts: 1689
Joined: Sat Feb 22, 2003 7:40 pm
Location: Shepparton Vic

Post by DAZ »

Guts wrote:Some cars have them standard, V6 triton is one that pops to mind.


thats you dream car :finger:

i dout there would be any legal issues and i run an engine cooler and there is nothing in it to slow it down
If you can not get there in a 4wd its not worth looking at
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests