Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
wires on tachos
wires on tachos
hey all bought a new after market tacho for my GQ and the instructions say it gets its power from the ignition switch..... tried what i thought was the one but no go.... looked at the wire diagram for the patrol but cant really understand what wire it goes to... so just wondering if anyone has done it before and how?
Luke
All your looking for is a hot wire that when the ignition is on there is power to that wire and when it is off its off, all you have to do is get a test light and find a hot wire, there are plenty of wires around to look at...
Before you crimp your lead on make sure it is not on when you turn to accessery's (spelling) just make sure its ON when in the ON position and OFF when in the ACC mode or OFF mode, then your laughing.
Hope this helps,
Casey
All your looking for is a hot wire that when the ignition is on there is power to that wire and when it is off its off, all you have to do is get a test light and find a hot wire, there are plenty of wires around to look at...
Before you crimp your lead on make sure it is not on when you turn to accessery's (spelling) just make sure its ON when in the ON position and OFF when in the ACC mode or OFF mode, then your laughing.
Hope this helps,
Casey
Who is online
Users browsing this forum: No registered users and 4 guests