Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
OIL FROTHING - ANY ADDITIVE?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
OIL FROTHING - ANY ADDITIVE?
Is there an additive that will stop oil frothing [must not affect the lubrication properties of the oil]?
frothing
oil frothing lol = Water
maybe over full but i recon water
maybe over full but i recon water
Re: frothing
oil usually froths when its OLD and fucked or very hot...
Change it and see what happens. use good oil, not Black and White Bi Lo shit.
Change it and see what happens. use good oil, not Black and White Bi Lo shit.
Big Red Toy wrote:why the hell would oil froth? change your oil
The crank can make the oil into one big milkshake if it is overfull, mixed with water or old. Most of the time it is associated with performance cars that do track work - not race cars as they ususally run dry sumps to reduce the resistance on the crank and allow them to run a greater volumes of oil
Tom
Sorry guys to fill in the blanks it is compressor oil being pumped by a sanden ac pump into a coalescing filter [OBA] - yes it is hot and under pressure. The main issue is it froths up and sometimes flows into the adjoining water filter before the auto-drain cuts in. I believe ATF has some anti-froth properties - any other ideas?
Who is online
Users browsing this forum: No registered users and 3 guests