Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

High range ratio

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

High range ratio

Post by GRIMACE »

Arghhh ihave search i knwo i asked this b4 and am about 90% sure i got an answer but I cant find the topic :?: :x

My Q is whats the standard high range of the borg warner transfer on a 89 range rover ? ? ?
And does it have the 3.32 low range like the lt230
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

RTFM
TD5 96 Discovery UTE.
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

:?:
Top
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Post by DaveS3 »

Read the F****** manual?
Land Rover Discovery - GQ conversion underway
Top
Posts: 1119
Joined: Mon Dec 16, 2002 4:24 pm
Location: Neither here nor there

Post by TuffRR »

Not 100% sure on high range but I think it is the same as the LT230 (for a Rangie 1.2:1 or whatever it is) but I do know that low range is slightly higher in low range (3.2:1 or somefing!)
Range Rover - 4.4 V8, MD Crawler Box, F&R Lockers, 35" Centipedes, 4" lift. Overqualified WebWheeler!!!

Discovery - Bling touring stuff!
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

DaveS3 wrote:Read the F****** manual?


I dont farklin have one :finger:
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

TuffRR wrote:Not 100% sure on high range but I think it is the same as the LT230 (for a Rangie 1.2:1 or whatever it is) but I do know that low range is slightly higher in low range (3.2:1 or somefing!)


Ok so my low range will be the only thing to change with a slight improvement to engine brakin :)
For some reason I thought the borg warner transfer was an almost 1:1 high range and I was thinkin that means that after putting in the 1.222:1 LT230 I have here, my gearing will be the same if i step up to 36" rubber from the current 33's.
Top
Posts: 1119
Joined: Mon Dec 16, 2002 4:24 pm
Location: Neither here nor there

Post by TuffRR »

Afraid not, I checked my manual last night and the BW case ratios are what i had said above. And as far as being a noticeable difference in low range, it will be about 1 km an hour in low first at about 3500rpm.

I'm running a Defender transfer case with 1.4:1 in high range to overcome gearing with larger tyres and the maxidrive crawler takes care of low range. This has meant i haven't had to change the diff ratios to anything weaker than a 3.54. Although in hindsight, I would have done the toy centre swap rather than putting a MD in the back.
Range Rover - 4.4 V8, MD Crawler Box, F&R Lockers, 35" Centipedes, 4" lift. Overqualified WebWheeler!!!

Discovery - Bling touring stuff!
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

Thanks TuffRR
I new the change to low range would be very minimal....
I not worried about low range its just the high range thats got me thinkin as I want to run a bigger tyre down the track (obviosuly) and I know at the moment my onroad gearing with the 33s is ok but abit sluggy at times.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 5 guests