Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rockcrawler Gears

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Rockcrawler Gears

Post by crankycruiser »

Been trying to get some rockcrawler gears for my mates sierra and rang a few places and they informed me that the first lot of rockcrawler gears that came out were good but they r having a lot of trouble with the new ones....
has anyone had any probs with their gears???
he is only afta the 80% reduction ones..
Top
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

Call Liam at Big Balls in Sydney, www.bigballsoffroad.com (i think)

get him to go the series 3 as long as they will fit in his transfer case. I think they fit 1985 or so onwards.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

I don't believe series one gears are aviailable from BBO/Rockhopper anymore. - There have been pretty much constant reliability problems. I have not seen a series 3 (6:1) fail yet though- they seem very good
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

go series 3 its the shite :D for the extra $$$ its worth it


i think i would have been disapointed with s1
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

We can supply either
4.16
5.14
6.1
they are also available through M&M custom as well.

Rockhopper only have 6.1 ratio they havn't had the series one for a while now.

SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 2001
Joined: Wed May 26, 2004 9:47 pm
Location: sydney

Contact:
Contact runnin4life

Post by runnin4life »

i duno much so what is the ratio of a 1.0 xfercase
Top
User avatar
Ric
Posts: 302
Joined: Wed May 05, 2004 12:26 pm
Location: Brisbane

Post by Ric »

what kind of prices are we looking at for s3?
'07 ML Triton

12 tonne excavator for hire:0421 076 548
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

Ric wrote:what kind of prices are we looking at for s3?


Mine was $1299

ad on the price of a new bearing kit also.
yeshemesh
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

zukin4life wrote:i duno much so what is the ratio of a 1.0 xfercase


1.568 high as opposed to 1.3 is 1.409 high.

12% lower.

It's 2.511 low as opposed to 2.3somethingicantremember. once again about 12% difference
Top
Posts: 2001
Joined: Wed May 26, 2004 9:47 pm
Location: sydney

Contact:
Contact runnin4life

Post by runnin4life »

sweet i knew there was a reason why i got the 1.0
Top
Posts: 32
Joined: Fri Apr 16, 2004 2:51 am
Location: italy

Contact:
Contact trialjimny

Post by trialjimny »

the samurai t/case is 2.268 low, the 410 t/case is 10,7% shorter in low.
[b][url=http://www.trialjimny.com][color=DarkOrange]TRIALJIMNY Performance[/color][/url][/b]
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

oops.... 10.7%... close enough to 12% for me still to be right ;)
Top
Posts: 32
Joined: Fri Apr 16, 2004 2:51 am
Location: italy

Contact:
Contact trialjimny

Post by trialjimny »

yep,
i think it would be difficult to feel the difference when you drive it...
;)
[b][url=http://www.trialjimny.com][color=DarkOrange]TRIALJIMNY Performance[/color][/url][/b]
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Post by christover1 »

OVERKILL ENGINEERING wrote:We can supply either
4.16
5.14
6.1
they are also available through M&M custom as well.

Rockhopper only have 6.1 ratio they havn't had the series one for a while now.

SAM


Who makes the 4:16 and 5:14 and cost please. Ya web site only lists rockhoppers for Sierras, and still lists the S1...I need gearing soon :D thanx.
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

calmini make the 4.1 and 5.1

they are a little more but they are basically a rebuild kit
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Post by christover1 »

RB zook wrote:calmini make the 4.1 and 5.1

they are a little more but they are basically a rebuild kit

thanx
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

a dude in WA killed a S3, only 8 months old...
http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?p=330738#330738

not saying they're crap, cos i still want some when i can afford them, but still...
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Post by christover1 »

stumped wrote:a dude in WA killed a S3, only 8 months old...
http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?p=330738#330738

not saying they're crap, cos i still want some when i can afford them, but still...


I've noticed the lack of warrantee on rockhoppers, doesn't inspire confidence, tho I not heard of too many failures of S3's.
I could take many months to save, not sure I want something unwarranted, tho if I fit it, theres no chance of warrantee anyway, I suppose..christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

i wouldn't worry bout the s3, doesn't gonads run one in his sierra/buggy thing? and thats running 46in claws, with 80 series front end and lux rear :?
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 30 guests