Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
2" lifted leaf springs
Moderators: toaddog, TWISTY, V8Patrol, Moderators
2" lifted leaf springs
Seeing as there wasn't much interest in my wanted ad recently, I wonder if I can drum up some comments on leaf springs here.
I'm looking at getting 2" lifted leaf springs all round on my MQ this week, and want to make sure I'm getting half decent stuff. Basically, the two cheapest options I've found are:
Old Man Emu "Dakar" ~$750
Fireflex Enforcer $760
Anyone have any comments on either of these brands (or in fact, whether brand matters)? Note that Old Man Emu have their normal range as well, but they were about twice as much. Any ideas on whether this "Dakar" range is that much worse?
I'm looking at getting 2" lifted leaf springs all round on my MQ this week, and want to make sure I'm getting half decent stuff. Basically, the two cheapest options I've found are:
Old Man Emu "Dakar" ~$750
Fireflex Enforcer $760
Anyone have any comments on either of these brands (or in fact, whether brand matters)? Note that Old Man Emu have their normal range as well, but they were about twice as much. Any ideas on whether this "Dakar" range is that much worse?
* Nothing is foolproof to a sufficiently talented fool *
Old Man Emu are fantastic i have had them under my Suzi for about 7 years and reckon they are awesome they have only recently lost their arch. i bouht them 2nd hand so who knows the actual age of them. They are built more for comfort and ride quality than out and out flex.
So what was your mate doing, what car, how was it set up? More info is probably needed than he broke them doin easy shit
So what was your mate doing, what car, how was it set up? More info is probably needed than he broke them doin easy shit
Ransom note = demand + collage
Ha, knew that would be the case - I'm none the wiser! Thanks for the comments though, it is nice to hear some first hand experience stories at least.
I was leaning towards the OME, because I liked the idea of the friction pads they have, they were a smidgen cheaper, and I have some respect for the brand (just casual observations on mailing lists and things + aussie + 4wd specific). But now I think I'll go for the Enforcers - about the same price, good known brand, not a "budget" line, and here's the thing which is swaying me - the shop is about 20 mins closer, and I'm running low on petrol money
I'd really like to get close to the full shock length of flex out of them if possible. I notice the enforcers have "graphite coating" which is supposed to reduce friction, and also "bolt type alignment clips". I guess the bolt types would be fractionally easier to modify... maybe. But then, I'm sure my warrantee would be up the creek if I were to start playing with that sort of thing!
Going to make *the* phone call tomorrow... my tyres phone call was a nervous moment, and although they were twice the price, I actually had a small cash reserve at that time...
I was leaning towards the OME, because I liked the idea of the friction pads they have, they were a smidgen cheaper, and I have some respect for the brand (just casual observations on mailing lists and things + aussie + 4wd specific). But now I think I'll go for the Enforcers - about the same price, good known brand, not a "budget" line, and here's the thing which is swaying me - the shop is about 20 mins closer, and I'm running low on petrol money
I'd really like to get close to the full shock length of flex out of them if possible. I notice the enforcers have "graphite coating" which is supposed to reduce friction, and also "bolt type alignment clips". I guess the bolt types would be fractionally easier to modify... maybe. But then, I'm sure my warrantee would be up the creek if I were to start playing with that sort of thing!
Going to make *the* phone call tomorrow... my tyres phone call was a nervous moment, and although they were twice the price, I actually had a small cash reserve at that time...
* Nothing is foolproof to a sufficiently talented fool *
i have enforcers under my 60 have been happy with them, however my mate has an awesome leave set up under his 60 was done from straight talk at blacktown, it flexes really good.
MQ080 had enforces under his mq, the rear flexed alright but had sagged heaps, the fronts were set wrong and he had a huge lift but they didnt really flex, pm him im sure he will give you a decent response about how he found them
MQ080 had enforces under his mq, the rear flexed alright but had sagged heaps, the fronts were set wrong and he had a huge lift but they didnt really flex, pm him im sure he will give you a decent response about how he found them
Do not have sexual relations with your father's sister; she is your father's close relative
Leviticus 18:12
Leviticus 18:12
I have always run OME where avialable and believe tham to be the best off the shelf springs available.
However, I have recently set up LJXtreem's car with Enforcer MK Front springs (three leafs per pack) all round and they are nice and soft and holding their arch well.
Just becuse someone can break something doesn't mean it is crap, it could be that that owner is either a)abusive c)using the part incorrectly d)is generally p1ssed of about his car, or there was a particular problem with that part. If the spring broke two weeks after installation, then it will be a warranty claim no worries. We were buying OME shocks in the early 90's when they were having heaps of problems with seals letting go, and they were always replaced under warranty.
We have flattened/twisted bent plenty of OME springs, but running sierras on up to 36's with only three leaves will do that. We have broken/bent Ranchos, etcetcetc and I would still recommend these products.
Although it might look like the shocks are limiting the OME springs, generally, once longer shocks are installed, spring life will be reduced due to the increased torsional load on the compressed spring due to the incresed droop onthe drooped side. Likewise, increased shackle length will overcompress them. I set up cars that do both of these things all the time, but you can't expect to overwork a soft spring and get years of service out of it.
However, I have recently set up LJXtreem's car with Enforcer MK Front springs (three leafs per pack) all round and they are nice and soft and holding their arch well.
Just becuse someone can break something doesn't mean it is crap, it could be that that owner is either a)abusive c)using the part incorrectly d)is generally p1ssed of about his car, or there was a particular problem with that part. If the spring broke two weeks after installation, then it will be a warranty claim no worries. We were buying OME shocks in the early 90's when they were having heaps of problems with seals letting go, and they were always replaced under warranty.
We have flattened/twisted bent plenty of OME springs, but running sierras on up to 36's with only three leaves will do that. We have broken/bent Ranchos, etcetcetc and I would still recommend these products.
Although it might look like the shocks are limiting the OME springs, generally, once longer shocks are installed, spring life will be reduced due to the increased torsional load on the compressed spring due to the incresed droop onthe drooped side. Likewise, increased shackle length will overcompress them. I set up cars that do both of these things all the time, but you can't expect to overwork a soft spring and get years of service out of it.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
I went with the Enforcers, and am very happy so far (and I haven't put them on the car yet!). The lads at All Fourx4 Spares were great and the final price very
Handy having one of the staff on here and into the Outerlimits scene himself.
Work starts tomorrow morning - I'm very excited
Work starts tomorrow morning - I'm very excited
* Nothing is foolproof to a sufficiently talented fool *
Heathx4 wrote:I went with the Enforcers, and am very happy so far (and I haven't put them on the car yet!). The lads at All Fourx4 Spares were great and the final price veryHandy having one of the staff on here and into the Outerlimits scene himself.
Work starts tomorrow morning - I'm very excited
get them in there heath, u gotta have it all ready for the weekend!!
___,,,,_('o')_,,,,____
part of the newy conspiracy...
part of the newy conspiracy...
Funny what you read here. I've had OME springs in the 60 for 12 years with no dramas at all. Done lots of 'hard stuff' as well as Simpson desert and the infamous Cape york corrugations. If they bend or' stuff up' there is something else happening that you're not being told about 

Damian.
should I swim it first ?
should I swim it first ?
bazzle wrote:The guys at All4x4 are great. Replaced my enforcers when they stuffed up
SO they all stuff up hey,,![]()
![]()
Bazzle
My drivers side spring bent like a W and they where only too happy to arrange replacement. Turned out that with 2" springs and 2 1/2" extended shackles the front torque bar was maxed out and stopping down-flex on the spring at all.
So my main point is that these guys are great and never questioned me and the replacement springs are great and haven't failed yet

[quote="fool_injected"]
I pity my brother when she is a teenager[/quote]
I pity my brother when she is a teenager[/quote]
OME are shitty cheap imports with crappy steel from India, the bastards bring em in for about $20 and sell em for $300.
Bought new ones for the front and they now look like a W shape, and that was about 2 weeks after putting em in, asked the idiots at the local ARB OME dealer in Wollongong, and their comment was that was how they went on a hilux, the stupid bastard at there workshop blamed it on my spring wedges, but how come they didn't do this with other springs.
Stay away from
OME
(Obviously some bias there from a bad experience)
Bought new ones for the front and they now look like a W shape, and that was about 2 weeks after putting em in, asked the idiots at the local ARB OME dealer in Wollongong, and their comment was that was how they went on a hilux, the stupid bastard at there workshop blamed it on my spring wedges, but how come they didn't do this with other springs.
Stay away from
OME
(Obviously some bias there from a bad experience)Try not to let your mind wander...It is too
small and fragile to be out by itself.
small and fragile to be out by itself.
Who is online
Users browsing this forum: No registered users and 3 guests