Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Custom Diff lock for Feroza

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Forum rules
Post Reply
Posts: 32
Joined: Wed Aug 04, 2004 5:05 pm
Location: Israel

Custom Diff lock for Feroza

Post by Oferoza »

I have an idea how to build a (rear) Diff lock for our Roza’s.
To run this idea I need to know if the standard Diff (side gears and diff pinion) can be installed inside the LSD case.
Another thing I need to know if I can find the LSD Diff case assy and cover.
I know that LSD Diff isn’t so common but maybe???

oferoza
Top
Posts: 669
Joined: Wed Sep 17, 2003 11:29 am
Location: Sydney

Post by Croz »

I am of no help to you but very interested... good luck. ;)
On boooooost!!
Top
Posts: 32
Joined: Wed Aug 04, 2004 5:05 pm
Location: Israel

Post by Oferoza »

some drawings from the service manual.

are the gear sides and the pinion shafts are the same??
if the answers for those Q are yes... and we can find
LSD case (or find the manufacturer...) i think the Diff lock for fez
is reachable.

oferoza
Top
Posts: 32
Joined: Wed Aug 04, 2004 5:05 pm
Location: Israel

Post by Oferoza »

the idea is to engrave truck shaft to the roza's dimensions with extra spline for the lock dog... similar to the maxidrive and as seen in this pic
Image
any suggestion will be regard and any problem that you observe...
if anyone have a solidworks (or same hardware) drawing of the axle and shaft it will be a great help.

oferoza
Top
Posts: 669
Joined: Wed Sep 17, 2003 11:29 am
Location: Sydney

Post by Croz »

I can email you the factory service manual for the rear differential if you need... or do you have it already?
On boooooost!!
Top
Posts: 32
Joined: Wed Aug 04, 2004 5:05 pm
Location: Israel

Post by Oferoza »

Croz wrote:I can email you the factory service manual for the rear differential if you need... or do you have it already?


the factory service manual i have in hand. but the draw there is just a sketch. no scale or full dimension...

p.s if anyone took pic of rear diff (and shaft) opened up it will help too.

oferoza
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

Have a look at this site- say they can make vacuum or air lockers to fit most diffs! Located in Melbourne.

http://www.mcnamaradiffs.com.au/products.html
David
Top
Posts: 32
Joined: Wed Aug 04, 2004 5:05 pm
Location: Israel

Post by Oferoza »

murcod wrote:Have a look at this site- say they can make vacuum or air lockers to fit most diffs! Located in Melbourne.

I E-maild them. but if this is the case... how come there is no locked Roza :?: and i mean with original axle :P
I guess the Mcnamara product will be very expensive :x

oferoza
Top
Posts: 669
Joined: Wed Sep 17, 2003 11:29 am
Location: Sydney

Post by Croz »

I emailed them also, but their email doesnt work..

I called the workshop this morning but unfortunately the guy I spoke to said there was no daihatsu diff covered in their line up... Wasnt all that interested either. He suggested I try ARB... :roll:
On boooooost!!
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

You should have suggested he have a read of their website Croz- then asked him the same question again! :lol:
David
Top
Posts: 669
Joined: Wed Sep 17, 2003 11:29 am
Location: Sydney

Post by Croz »

Yeah I mentioned what the web page notes, but he wasnt interested, this was the same time as I mentioned his email didnt work but I dont think he knew what I meant...


Ahhh.... well... it seems that people who know diffs dont know what Ferozas are... Dont get me wrong, the company seems to be excellent at what they do, just of no help to our needs.
On boooooost!!
Top
Posts: 32
Joined: Wed Aug 04, 2004 5:05 pm
Location: Israel

Post by Oferoza »

So we're in the same start point... i can build customized diff lock but need some help...
If anyone took pic of rear diff (and shaft) opened up it will help.
Drawing of the raer axle (fully defined and scaled) will be great... even just the shaft tail (the other side of the spline section).
Another important thing... what is this "line" at the drawing of the axle?
can this "line" desturb to the new shaft with the extra spline section?? (will be thicker alittle...)
Image
If tou cant see the pic go to RS-4...

oferoza
Last edited by Oferoza on Wed Sep 01, 2004 4:42 pm, edited 1 time in total.
Top
Posts: 32
Joined: Wed Aug 04, 2004 5:05 pm
Location: Israel

The mail and Jeff's answer

Post by Oferoza »

From: "Jeff McNamara" <mcnamara@mira.net>
To: <ofer_feroza@yahoo.com>
Subject: Re: Vacuum Differential Locking Unit &/or Locking Carrier
Date: Tue, 31 Aug 2004 13:17:08 +1000


Sorry, we don't sell that part.
Regards.
Jeff


----- Original Message -----
From: ofer
To: mcnamara@mira.net
Sent: Tuesday, August 31, 2004 1:07 AM
Subject: Vacuum Differential Locking Unit &/or Locking Carrier


Do you have one that fits to Daihatsu Feroza F300??
thanks Ofer

Maybe they dont have that part... but have very fast service :D

oferoza
Top
Posts: 576
Joined: Wed Jun 02, 2004 8:17 pm
Location: Adelaide, South Aus

Post by Dangerous Dave »

Don't know if this is any help but i've a mate who is an industrial designer who uses solid works and has it on his home PC. I'm sure i'd be able to get him to help if i could provide him with what to create.

Dave
Top
Posts: 32
Joined: Wed Aug 04, 2004 5:05 pm
Location: Israel

Post by Oferoza »

Dangerous Dave wrote:Don't know if this is any help but i've a mate who is an industrial designer who uses solid works and has it on his home PC. I'm sure i'd be able to get him to help if i could provide him with what to create.

Dave


It can be a great help. I'm now trying to find rear shaft to take dimensions... i dont want to take out mine...
I'll be in touch after it's all in my hand.

oferoza
Top
Posts: 51
Joined: Sun Feb 23, 2003 10:55 am
Location: Melbourne

Post by marc »

I dont no about the rest of the list, but I would pay any thing for a locker of any sort..
Please make my dreams come true! :cry:
Top
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

marc wrote:I dont no about the rest of the list, but I would pay any thing for a locker of any sort..
Please make my dreams come true! :cry:


Haultech traction control ;) Search for it if you don't know what it is :)

For the $ a lot of you guys will be lookin at for a custom diff lock you can get traction control f & r :D About $2500 it'll be like havin both ends locked :)

One n your midst is already lining up for it ;)
Top
Post Reply

Return to “Ford / Mazda / Daihatsu / Homeless”

Who is online

Users browsing this forum: No registered users and 2 guests