Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

sierra transfer case mounts

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

sierra transfer case mounts

Post by antt »

are the mounts for the 2 different sierra transfer cases (1L & 1.3L) the same?
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Re: sierra transfer case mounts

Post by christover1 »

antt wrote:are the mounts for the 2 different sierra transfer cases (1L & 1.3L) the same?

no, but you can interchange the members that hold the mounts. christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

thanks christover.

is it right that the 1L case is 12% lower than the 1.3L case?
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Post by christover1 »

antt wrote:thanks christover.

is it right that the 1L case is 12% lower than the 1.3L case?


yes, or close to it, on high and low...mine also has 1.o diffs, so a little lower again
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

thanks again

now need to work out gearing with duals through a 1.3 and a 1l
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Re: sierra transfer case mounts

Post by Guy »

christover1 wrote:
antt wrote:are the mounts for the 2 different sierra transfer cases (1L & 1.3L) the same?

no, but you can interchange the members that hold the mounts. christover


Chris I belive that only the ute 1.0 mounts are different, on the swb 1.0's the mounts are the same .. as are the brackets etc ..
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Re: sierra transfer case mounts

Post by christover1 »

love_mud wrote:
christover1 wrote:
antt wrote:are the mounts for the 2 different sierra transfer cases (1L & 1.3L) the same?

no, but you can interchange the members that hold the mounts. christover


Chris I belive that only the ute 1.0 mounts are different, on the swb 1.0's the mounts are the same .. as are the brackets etc ..


ya could be right, have never looked, but the early 1.0 litre t-case, without the 4wd light, is totally different, so that could be it, chrustover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

The early 1.0ltr case does have different mounts to the later case with the light, I have both here.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Top
Posts: 215
Joined: Sun Jul 18, 2004 2:34 pm
Location: Tassie, Australia

Contact:
Contact 85zook

Post by 85zook »

Do either of the early/late 1L cases have the same mounts as the 1.3L case? Theres a 1L zook sitting about 50m from where im sitting now and it hasnt been moved in about 3 years!! Its in immaculate condition!! Time to go make an offer i reckon! :D
Top
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

the late 1.0ltr case takes the S3 gears so it has to be similar. Not sure if they are the same though.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Top
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

antt wrote:thanks again

now need to work out gearing with duals through a 1.3 and a 1l


what u workin on dude? is this for ur vit?
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Top
Posts: 215
Joined: Sun Jul 18, 2004 2:34 pm
Location: Tassie, Australia

Contact:
Contact 85zook

Post by 85zook »

On the topic of 1L driveline components. Are the diff centres a straight swap into the 1.3L Narrow Track? I would imagine it is the same diff/axle housing? And how would it go running 1L transfer and diffs with the 1.6 EFI Vit engine and 5 speed sierra gearbox?
Top
Posts: 775
Joined: Tue Mar 18, 2003 8:10 pm
Location: under the wifes thumb

Post by zookjedi »

85zook wrote:On the topic of 1L driveline components. Are the diff centres a straight swap into the 1.3L Narrow Track? I would imagine it is the same diff/axle housing? And how would it go running 1L transfer and diffs with the 1.6 EFI Vit engine and 5 speed sierra gearbox?


no the centres are different , the n/t centres and the wide track centres are interchangable , but neither is with the 1ltr diffs
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

stumped wrote:
antt wrote:thanks again

now need to work out gearing with duals through a 1.3 and a 1l


what u workin on dude? is this for ur vit?


maybe ;)

useless info time-> a rockhoppered vit case to an 8:1 geared sierra case gives you a 409.2:1 crawl ratio :shock:
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest