Looks like Trailtough has a Hilux coil SAS kit in the works for the Vitara according to a couple of posts on http://zukiworld.com/
" Call Brent at Trailtough, he has a kit almost done if not done for doing just that. It has everything you need to accomplish the Toykick SAS coil swap. He told me that there is minimal welding that needs to be done. The spring pads for the leaf springs that are on the stock Toy axles are the centering point for the control arm mounts on the axle. You bolt the mounts to the housing, then you weld them on. The rest is a bolt on to the truck. The kit comes with steering, shocks & mounts, brake hoses, I think it might even come with drivelines, not sure about that one, all the control arms & mounts, coils & buckets, might be more, can't remember right now it's been a while since that conversation came up. You'd have to call him on the price, keep in mind that it is a bolt on kit that is very complete. "
" I have seen Trailtoughs SAS Kick it is a sweet setup. It sit on 35s with no body lift and they can lift the rear tire 3ft off the ground. Also when the tire is stuffed in the wheel well there is an even 3/8 of and in between the tire and the fender all the wat around. Last time I talked with Brent they where in the process of blueprinting it. It looks pretty trick "
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Vit SAS kit
At least they haven't released a test rig like some one else, got every ones hopes with a review on a major zook site and then not told the potential buyers when the farking thing will be available !! 
You think they would at least have the decency to say weather they "will" or "will not" be releasing the kit for sale.
I hope T/Ts kit don't end up the same !
Shane
You think they would at least have the decency to say weather they "will" or "will not" be releasing the kit for sale.
I hope T/Ts kit don't end up the same !
Shane
'93 Escudo.16v K&N, Chase Header, Calmini 3" suspension, 3" custom alloy bodylift, Centerforce dualfriction clutch, Calmini 4:24.1,Calmini 5:83 R&Ps + Anvil, ARB Front+Rear, Custom front bumper with Warn 6000, Safari snorkel, 32x10.5 Mongrels.
overkill, how cheap can you make the axel that you had on your buggy if you could suround a kit around that i'd buy it if it was a resonable price.
Matt
p.s. could you have a look at http://www.outerlimits4x4.com/PHP_Modul ... hp?t=25488 and tell me if you think you could make it?
Matt
p.s. could you have a look at http://www.outerlimits4x4.com/PHP_Modul ... hp?t=25488 and tell me if you think you could make it?
twinnie wrote:overkill, how cheap can you make the axel that you had on your buggy if you could suround a kit around that i'd buy it if it was a resonable price.
Matt
p.s. could you have a look at http://www.outerlimits4x4.com/PHP_Modul ... hp?t=25488 and tell me if you think you could make it?
The price of making the front diff I guess is the killer for doing the SAS conversion at tthe moment.
I am looking into a way to make the diff a lot cheaper. A Hilux diff is the next option but they aren't wide enough. Also the ratio isn'available in the yota range. The other option is to run lux diffs front and rear and just get some offset wheels.
Okay I will start people thinking what would they prefer coils or leaves.??
What you have drawn is possible but what are you planning to use as dampening when the air bag is deflated??
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
www.overkill4x4.com
OVERKILL ENGINEERING wrote:twinnie wrote:overkill, how cheap can you make the axel that you had on your buggy if you could suround a kit around that i'd buy it if it was a resonable price.
Matt
p.s. could you have a look at http://www.outerlimits4x4.com/PHP_Modul ... hp?t=25488 and tell me if you think you could make it?
The price of making the front diff I guess is the killer for doing the SAS conversion at tthe moment.
I am looking into a way to make the diff a lot cheaper. A Hilux diff is the next option but they aren't wide enough. Also the ratio isn'available in the yota range. The other option is to run lux diffs front and rear and just get some offset wheels.
Okay I will start people thinking what would they prefer coils or leaves.??
What you have drawn is possible but what are you planning to use as dampening when the air bag is deflated??
SAM
can u make the suzanna wider then u had under the buggy? id ont think u can?
cos my toy diff is bout 2inches wider then it
redzook wrote:OVERKILL ENGINEERING wrote:redzook wrote:can u make the suzanna wider then u had under the buggy? id ont think u can?
cos my toy diff is bout 2inches wider then it
Yes we can make it wider and I don't think your lux axle will be wider.
SAM
measured it the other day the lux was wider
wms to wms
Yeah due to the rim offset. Check out the vitara rear wheelbase with it's +ve offset rims.... the hilux has -ve offset.
Beastmavster wrote:redzook wrote:OVERKILL ENGINEERING wrote:redzook wrote:can u make the suzanna wider then u had under the buggy? id ont think u can?
cos my toy diff is bout 2inches wider then it
Yes we can make it wider and I don't think your lux axle will be wider.
SAM
measured it the other day the lux was wider
wms to wms
Yeah due to the rim offset. Check out the vitara rear wheelbase with it's +ve offset rims.... the hilux has -ve offset.
nothin to do with vitara stuff
plus i said wms(wheel mountin surface) to wms nothing to do with rims
cj wrote:I know it would cost more but I wouldn't really be interested in SAS unless it was coils. I like my IFS and what I really want is a CV solution. Maybe something using Porsche 930 CV's and a slip spline in betweenNow there's a product for Vitara owners.
Has anyone really looked into this?
'03 GV
redzook wrote:Beastmavster wrote:redzook wrote:OVERKILL ENGINEERING wrote:redzook wrote:can u make the suzanna wider then u had under the buggy? id ont think u can?
cos my toy diff is bout 2inches wider then it
Yes we can make it wider and I don't think your lux axle will be wider.
SAM
measured it the other day the lux was wider
wms to wms
Yeah due to the rim offset. Check out the vitara rear wheelbase with it's +ve offset rims.... the hilux has -ve offset.
nothin to do with vitara stuff
plus i said wms(wheel mountin surface) to wms nothing to do with rims
the suzana is apparently narrower than a vitara rear by 1 inch
sorry to break it to ya tim, but a hilux diff is narrower than a vit diff
OVERKILL ENGINEERING wrote:twinnie wrote:overkill, how cheap can you make the axel that you had on your buggy if you could suround a kit around that i'd buy it if it was a resonable price.
Matt
p.s. could you have a look at http://www.outerlimits4x4.com/PHP_Modul ... hp?t=25488 and tell me if you think you could make it?
The price of making the front diff I guess is the killer for doing the SAS conversion at tthe moment.
I am looking into a way to make the diff a lot cheaper. A Hilux diff is the next option but they aren't wide enough. Also the ratio isn'available in the yota range. The other option is to run lux diffs front and rear and just get some offset wheels.
Okay I will start people thinking what would they prefer coils or leaves.??
What you have drawn is possible but what are you planning to use as dampening when the air bag is deflated??
SAM
coils are the only way to go
antt wrote:redzook wrote:Beastmavster wrote:redzook wrote:OVERKILL ENGINEERING wrote:redzook wrote:can u make the suzanna wider then u had under the buggy? id ont think u can?
cos my toy diff is bout 2inches wider then it
Yes we can make it wider and I don't think your lux axle will be wider.
SAM
measured it the other day the lux was wider
wms to wms
Yeah due to the rim offset. Check out the vitara rear wheelbase with it's +ve offset rims.... the hilux has -ve offset.
nothin to do with vitara stuff
plus i said wms(wheel mountin surface) to wms nothing to do with rims
the suzana is apparently narrower than a vitara rear by 1 inch
sorry to break it to ya tim, but a hilux diff is narrower than a vit diff
i know a vit is wider but my front diff is wider then the suzana under the buggy
i dont give a shit if the suzana is APPARENTLY narrower then the vit diff
i measured the toy V's suzana the other day (steve[owner of the buggy] lives just down the road) and the TOY WAS WIDER
redzook wrote:antt wrote:redzook wrote:Beastmavster wrote:redzook wrote:OVERKILL ENGINEERING wrote:redzook wrote:can u make the suzanna wider then u had under the buggy? id ont think u can?
cos my toy diff is bout 2inches wider then it
Yes we can make it wider and I don't think your lux axle will be wider.
SAM
measured it the other day the lux was wider
wms to wms
Yeah due to the rim offset. Check out the vitara rear wheelbase with it's +ve offset rims.... the hilux has -ve offset.
nothin to do with vitara stuff
plus i said wms(wheel mountin surface) to wms nothing to do with rims
the suzana is apparently narrower than a vitara rear by 1 inch
sorry to break it to ya tim, but a hilux diff is narrower than a vit diff
i know a vit is wider but my front diff is wider then the suzana under the buggy
i dont give a shit if the suzana is APPARENTLY narrower then the vit diff
i measured the toy V's suzana the other day (steve[owner of the buggy] lives just down the road) and the TOY WAS WIDER
not apparantly......sam k told me it is 1inch narrower than a vitara rear when i was looking at buying it
whats the outside edge to outside edge of your tires tim? i'll meaure mine with the mongrels on...........not for a pissing contest, just for curiosity
Who is online
Users browsing this forum: No registered users and 3 guests