Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Suzuki 1.6 carby to efi

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 43
Joined: Thu Aug 12, 2004 7:42 pm
Location: Melbourne

Suzuki 1.6 carby to efi

Post by Jwreck »

Can anyone tell me if I can set up EFI on my 92 carbied 1.6 Vitara?
Currently has carby with electric ignition but need more mumbo :armsup:

There must be kits out there but is there a conversion/kit available??
"I roll and rock rock n' roll" -K.Keith
Top
Posts: 511
Joined: Thu Oct 31, 2002 8:59 am
Location: Sydney

Contact:
Contact Liam

Post by Liam »

Yes you can bolt the single point throttle body off a vit or baleno on. 90% sure the manifold is the same. You'll want the computer, harness and oxygen sensor. I have a vague recollection that you'll need to swap the dizzy to get the computer working ( could be wrong here)
The multipoint set up won't work properly without the head to suit ( inlet ports and water jackets are different enough.) Joining the looms isn't that hard ( and you can add power steer idle up circuit)
www.bbmotorsports.com.au
Top
Posts: 43
Joined: Thu Aug 12, 2004 7:42 pm
Location: Melbourne

Post by Jwreck »

So no kits to speak of then...sounds like I'm in for a hunt.

Thanks for the good word Liam.

:D
"I roll and rock rock n' roll" -K.Keith
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

How much "mumbo" does throttle body efi actually add?
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 43
Joined: Thu Aug 12, 2004 7:42 pm
Location: Melbourne

Post by Jwreck »

Word has it about 4.483732 ..nah, about 5%. No pro though.. just what I've heard. The grand vision is to give it some pep on the cheap. EFI/extractors/snorkel .. any ideas? :roll:
"I roll and rock rock n' roll" -K.Keith
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

Much more than 5% even with the 8V efi.... more like about 15%.

Better power, more fuel economy. Worth considering.

Also as the Carby starts off with lower compression than the EFI it's a great basis for turbocharging or supercharging.
Top
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Contact:
Contact mud4b

Post by mud4b »

I HAVE A 1.6 SINGLE POINT THROTTLE BODY AND MANIFOLD AND ECU BUT IM WAITING ON THE LOOM...

NEEDS A NEW INJECTOR THOUGH...
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Top
Posts: 728
Joined: Sun Aug 24, 2003 8:46 pm
Location: Canberra (too far from the sea)

Post by twinnie »

is the 1.3 gti heads and efi a bolt on?

Matt
Top
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

hey mud4b, what sort of $$$ for the loom, manifold, throttle body and ECM shipped to melbourne?
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Be interested in the $$ as well. Thanks Mud4B

On the performance note. Would the SPI take in account for intake and fueling that I am running a Sports cam, extractors and filter. (mostly the cam requirements)

cheers

Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

btt

as above
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 20
Joined: Mon Sep 06, 2004 9:52 am
Location: North Brisbane

Post by hey_all »

Beastmavster wrote:Much more than 5% even with the 8V efi.... more like about 15%.

Better power, more fuel economy. Worth considering.

Also as the Carby starts off with lower compression than the EFI it's a great basis for turbocharging or supercharging.


What is the compression of the two engines?

I suppose it doesn't really matter though, because if you where going to supercharge the carby bottom end you would probably need a rebuild anyway, maybe forgies and then you would just get lower compression pistons to suit anyway.

But yea, I'm looking for a half cut of the multipoint engine... so if someone wants to sell me one give me a yell!
Top
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Contact:
Contact mud4b

Post by mud4b »

nicbeer wrote:Be interested in the $$ as well. Thanks Mud4BNO LOOM AS YET...BUT I WOULD BE LOOKING FOR AROUND $500

On the performance note. Would the SPI take in account for intake and fueling that I am running a Sports cam, extractors and filter. (mostly the cam requirements)YES IT WILL COMPENSATE FOR THIS..

cheers

Nic
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Top
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Contact:
Contact mud4b

Post by mud4b »

I HAVE A COMPLETE 1600 SINGLE POINT G16B,that i can get overnight
looking at around $1400....

comes with air/steer....
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

hey_all wrote:
Beastmavster wrote:Much more than 5% even with the 8V efi.... more like about 15%.

Better power, more fuel economy. Worth considering.

Also as the Carby starts off with lower compression than the EFI it's a great basis for turbocharging or supercharging.


What is the compression of the two engines?

I suppose it doesn't really matter though, because if you where going to supercharge the carby bottom end you would probably need a rebuild anyway, maybe forgies and then you would just get lower compression pistons to suit anyway.

But yea, I'm looking for a half cut of the multipoint engine... so if someone wants to sell me one give me a yell!



Cant find my manual and may have given it to the Viagra's new owner or it might be lost in the garage (happens pretty easily).

From memory it was something like 8.8 vs 9.3:1 although if you have an import motor it may vary.

Get off your lazy bum and do a search it'll be on redbook and about 20,000 other sites :finger:
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest